路博潤ESTANE 54600 TPU
Technical Data Sheet Type: ESTANE? 54600 is a 92A aromatic Polyester-based thermoplastic polyurethane (TPU). Features: Very good physical properties and chemical resistance and wide processing window for calendering. Uses: Melt coating/calendering, flat die/cast film extrusion Physical Properties Value (Metric) Unit Test Method Hardness (5 sec) 92 +/- 3 Shore A ASTM D-2240 Specific Gravity 1.22 ASTM D-792 Tensile Strength 8500 (58.6) psi (MPa) ASTM D-412 Ultimate Elongation 490 % “ Tensile Stress at - 100 % Elongation 1400 (6.9) psi (MPa) ASTM D-412 - 300 % Elongation 3600 (24.8) psi (MPa) “ Tear Strength Graves 640 (11.4) lb/in (kg/mm) ASTM D-624 (die C) Trouser 170 (3.0) lb/in (kg/mm) ASTM D-470 Taber Loss (1000 rev) 0.00159 (45) oz (mg) ASTM D-3389 (H18, 1000g) Tm (by DSC) 266 (130) °F (°C) Lubrizol Advanced Materials Tg (by DSC) -4 (-20) °F (°C) Lubrizol Advanced Materials ? Prior to testing samples were conditioned at 23°C for 48 hours. ? Based on extruded sheet (30 mils). ? Listed values are “typical (average) values” and should / cannot be applied for specification purposes. Supply Form and Standard Packaging ? ? ESTANE 54600 TPU is supplied in pellet form and packaged in 50 lb bags or 1000 lb |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。