ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/ABLEBOND 2025D電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰 ABLESTIK 2025D die attach adhesive is designed for use inarray packaging.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Thixotropic Index (0.5/5 rpm) 4.4
Viscosity, Brookfield CP51, 25 °C, mPa•s (cP):
Speed 5 rpm 11,500
Work Life by Gel Time, hours:
@ 25oC, 30cc syringe 16
@ 25oC, 10cc syringe 24
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minute ramp to 175°C + 15 minutes @ 175°C
Weight Loss on Cure
10 x 10 mm Si die on glass slide, % 2.5
The above cure profiles are guideline recommendations. Cureconditions (time and temperature) may vary based on customers'experience and their application requirements, as well as customercuring equipment, oven loading and actual oven temperatures
Storage
Store product in the unopened container in a dry location. Storageinformation may be indicated on the product container labeling.Optimal Storage: -40 °C. Storage below minus (-)40 °C or greaterthan minus (-)40 °C can adversely affect product properties.
樂泰 ABLESTIK 2025D貼片粘合劑設計用于陣列包裝。固化材料的典型特性
觸變指數（0.5 / 5 rpm）4.4
粘度，Brookfield CP51,25℃，mPa•s（cP）：
轉速5 rpm 11,500
工作時間凝膠時間，小時：
@25oC，30cc注射器16
@25oC，10cc注射器24
保質期@ -40°C（制造日期），第365天
典型的固化性能
治愈時間表
在175℃下升溫至175℃+15分鐘
治愈減肥
10 x 10 mm Si玻片上的模具，％2.5以 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。