HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-G730-2電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL KL G730 epoxy molding compound deliversoutstanding performance and ease of use. This material isdesigned to achieve JEDEC Level 1 requirements, at 260°C
reflow temperature. Hysol®樂泰 HYSOL KL G730 offersenhanced reliability peformance for T/LQFP packages.樂泰 HYSOL KL G730 meets UL 94 V-0 Flammability at3.175mm thickness.TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 33Spiral Flow, @ 175°C, cm 129Shelf Life:@ 5oC, months 6TYPICAL PROCESS DATAHandlingPreheat Temperature :Conventional mold, °C 80 to 100Automold, seconds 0 to 5Molding Temperature, °C 150 to 195Molding Pressure, Kg/cm2 40 to 100Transfer Time:
Conventional mold, seconds 10 to 15Automold, seconds 4 to 10Curing Time, @ 175oC:
Conventional mold, seconds 60 to 120Automold, seconds 50 to 90Post Cure @ 175°C, hours 4 to 6StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers. After removal from cold
storage, the material MUST be allowed to come to roomtemperature, in the sealed container, to avoid moisturecontamination. The suggested waiting time for a standard 15kg carton box is 24 hours.
樂泰 HYSOL KL G730環氧樹脂模塑復合材料具有出色的性能和易用性。該材料設計為在260°C達到JEDEC 1級要求回流溫度。 Hysol®樂泰HYSOL KL G730提供了T / LQFP封裝的可靠性性能.樂泰 HYSOL KL G730滿足UL 94 V-0厚度為1.75mm的可燃性 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。