HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL GR2310電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL GR 2310 epoxy molding compound delivers outstanding performance and ease of use.
樂泰 HYSOL GR 2310 meets UL 94 V-0 Flammability at 6.35mm thickness.
YPICAL PROPERTIES OF UNCURED MATERIAL Gel Time @ 175 °C, seconds 15 Spiral Flow, @ 177°C, cm 68.58
Shelf Life: @ 5oC, days 365 TYPICAL PROCESS DATA Handling Preheat Temperature , °C 80 to 95 Molding Temperature, °C 140 to 180 Transfer Pressure, Kgf/cm2 40 to 85 Transfer Time, seconds 6 to 15 Curing Time, : @ 177oC, seconds 30 to 45 Curing Time, 3 mm section: Conventional mold: @ 175oC, seconds 70 to 90 Automold: @ 175oC, seconds 50 to 70 Post Cure @ 175°C, hours 2 to 6Storage Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling.
Powder Storage - Powder or preforms should be stored at 5oC or below, in closed containers. After removal from cold storage, the material MUST be allowed to come to room temperature, in the sealed container, to avoid moisture contamination.
The suggested waiting time for a standard 15 kg carton box is 24 hours.
Material removed from containers may be contaminated during use. Do not return product to the original container.
樂泰 HYSOL GR 2310環氧樹脂模塑料具有出色的性能和易用性。
LOCTI |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。