漢高漢高樂泰樂泰 E-214HP
技術服務熱線：021-51693135 / 021-22818476
樂泰® EA E-214HP™ is a light paste, industrial grade epoxy adhesive. This one-component, no-mix, heat activated formulation develops tough, strong, structural bonds which provide excellent peel resistance and impact strength. When fully cured, the epoxy offers superior thermal shock resistance, excellent mechanical and electrical properties, and withstands exposure to a wide variety of solvents and chemicals. This product bonds to a wide variety of materials, including metals, glass, ceramics and plastics.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.11
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 7, speed 1 rpm, 2,000,000 to 3,000,000LMS
Spindle 7, speed 2.5 rpm 800,000 to 1,500,000LMS
Flash Point - See SDS
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties:
Glass Transition Temperature ISO 11359-2, °C 120
Shore Hardness, ISO 868, Durometer D 85
Elongation, at break, ISO 527-2, % 7
Tensile Strength, ISO 527-2 N/mm2 31
(psi) (4,460)
Electrical Properties:
Dielectric Breakdown Strength,
IEC 60243-1, kV/mm
22
TYPICAL PERFORMANCE OF CURED MATERIAL
Adhesive Properties
Cured for 2 hours @ 120 °C followed by 4 hours @ 22 °C, 0 gap
Lap Shear Strength, ISO 4587:
Steel (grit blasted) N/mm2 33
(psi) (4,820)
Aluminum (acid etched & abraded) N/mm2 ≥13.8LMS
(psi) (≥2,000)
Aluminum (anodised) N/mm2 8.4
(psi) (1,220)
Stainless steel N/mm2 37
(psi) (5,340)
Polycarbonate N/mm2 10
(psi) (1,430)
Nylon N/mm2 1.2
(psi) (180)
Wood (Fir) N/mm2 5
(psi) (720)
Block Shear Strength, ISO 13445:
Epoxy N/mm2 9.2
(psi) (1,330)
Glass N/mm2 23
(psi) (3,370)
PVC N/mm2 5.2
(psi) (760)
Acrylic N/mm2 3.7
(psi) (530)
樂泰®EA e-214hp™是輕漿，工業級環氧樹脂粘合劑。這一成分，不混合，熱激活配方開發堅韌，堅固，結構鍵，提供優異的耐剝離性和沖擊強度。完全固化后的環氧樹脂，提供優異的抗熱震性、優良的機械和電氣性能 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。