樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/樂泰 5404電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
SI 5404™ is designed to bond metallic heat sinks, ceramic
chips and circuit board substrates. SI 5404™ applications
include the bonding of various heat generating devices (power
devices) to their respective heat sinks. The adhesive is
designed to provide a strong bond between the device and its
heat sink as well as low resistance to the flow of heat from the
electronic device to the heat sink. A typical application would
be the bonding of any power semiconductor, module, graphics
processor or other heat generating device to a heat sink or
metal enclosure in an electronics circuit.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 2.3 to 2.45LMS
VOC, ASTM D 3960, g/l 32.1
Flash Point - See SDS
Extrusion Rate, g/min:
Pressure 0.35 MPa, temperature 25 °C:
Semco Cartridge 180 to 400LMS
TYPICAL CURING PERFORMANCE
We recommend minimizing the time during which the fixtured parts
are exposed to a temperature above 30°C. This will help maintain a
consistent dispersion of the conductive filler within the adhesive
matrix.
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or
greater than 8 °C can adversely affect product properties.
SI 5404™設計用于粘接金屬散熱器，陶瓷
芯片和電路板基板。 SI 5404™應用
包括各種發熱裝置的接合（動力
設備）到它們各自的散熱器。粘合劑是
旨在提供設備與其之間的牢固聯系
散熱片以及耐 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。