漢高漢高樂泰樂泰 E-30 CL
技術服務熱線：021-51693135 / 021-22818476
樂泰® EA E-30CL™ is a low viscosity, industrial grade epoxy adhesive. Once mixed, the two component epoxy cures at room temperature with minimal shrinkage to form an ultra clear adhesive bondline with excellent impact resistance. The fully cured epoxy is resistant to a wide range of chemicals and solvents and has excellent dimensional stability over a wide temperature range. Typical applications include bonding, small potting, staking and laminating applications where optical clarity and excellent structural, mechanical and electrical insulating properties are required. 樂泰® EA E-30CL™ bonds most materials including glass, optical fibers, ceramics, metals, and many rigid plastics.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Resin:
Specific Gravity @ 25 °C 1.1
Flash Point - See SDS
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 6, speed 20 rpm, 10,500
Hardener:
Specific Gravity @ 25 °C 1.0
Flash Point - See SDS
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 5, speed 20 rpm, 2,250
Mixed:
Specific Gravity @ 25 °C 1.07
TYPICAL CURING PERFORMANCE
Tack Free Time @ 25 °C,(low humidity), minutes 160
Working Time @ 25 °C, minutes 30
Pot life @ 100 °C, 250 grams, seconds 90 to 150LMS
樂泰®EA e-30cl™是一種低粘度，工業級環氧樹脂粘合劑。一旦混合，雙組分環氧樹脂的固化收縮率極小的房間溫度在形成超透明膠帶膠層具有優良的耐沖擊性。完全固化的環氧樹脂是耐廣泛的化學品和溶劑，并具有良好的尺寸穩定性，在很寬的溫度范圍內。典型的應用包括粘接，小盆栽，跑馬圈地和復合應用中的光學清晰度和良好的結構，機械和電氣絕緣性能的要求。樂泰®EA e-30cl™債券大多數材料，包括玻璃、光學纖維、陶瓷、金屬、硬質塑料和許多。
固化材料的典型性能
Resin：
比重@ 25°C 1.1
閃點-見SDS
粘度，Brookfield - RVT，25°C，MPA•S（CP）：
主軸6，轉速20轉，10500
Hardener：
比重@ 25°C 1
閃點-見SDS
粘度，Brookfield - RVT，25°C，MPA•S（CP）：
主軸5，轉速20轉，2250
|
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。