樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/樂泰 3873電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
3873™ is a self-shimming, thermally conductive adhesive.
When used with Activator 7387™, it cures rapidly to
form a high strength, high modulus, thermoset acrylic polymer.
A uniform bondline thickness of 0.127mm results from the
incorporation of solid glass spheres. Recommended
applications include the bonding of various heat generating
devices (power devices) to thermal spreaders.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 2.08
Flash Point - See MSDS
Viscosity, Brookfield - HBT, 25 °C, mPa•s (cP):
Spindle TB, speed 0.5 rpm 750,000 to 2,000,000LMS
Spindle TB, speed 5.0 rpm 200,000 to 600,000LMS
TYPICAL CURING PERFORMANCE
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The graph
below shows the shear strength developed with time on grit
blasted steel lap shears compared to different materials and
tested according to ISO 4587.
Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C or
greater than 8 °C can adversely affect product properties
3873™是一種自動補片導熱膠。
當與Activator 7387™一起使用時，它可以快速固化
形成高強度，高模量，熱固性丙烯酸聚合物。
均勻的粘合線厚度為0.127mm
摻入固體玻璃球。推薦的
應用包括各種發熱的結合
設備（電源設備）到散熱器。
固化材料的典型特性
比重@ 25°C 2.08
閃點 - 參見MSDS
粘度，Brookfield-HBT，25℃ |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。