HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/HYSOL US5532電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰 STYCAST US 5532 polyurethane potting and
encapsulating compound flows well and adheres to many
substrates. It is mineral filled and castor oil/MDI urethane
based.
樂泰 STYCAST US 5532 meets UL 94 V-0 Flammability
at 12.2 mm thickness.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Part A Properties
Viscosity @ 25 °C, mPa∙s (cP) 50 to 100
Specific Gravity 1.23
Flash Point - See SDS
Part B Properties
Viscosity @ 25 °C, mPa∙s (cP) 8,000 to 14,000
Specific Gravity 1.5
TYPICAL CURING PERFORMANCE
Recommended Cure Schedule
12 to 24 hours @ 25°C
Alternate Cure Schedule
1 to 3 hours @ 60 to 80°C
The above cure profile is a guideline recommendation. Cure
conditions (time and temperature) may vary based on
customers' experience and their application requirements, as
well as customer curing equipment, oven loading and actual
oven temperatures. STORAGE:
Store product in the unopened container in a dry location. Storage
information may be indicated on the product container labeling.
Liquid Storage - Liquids should be stored at 25°C or below, in
closed containers. If stored below 25°C, the material MUST be
allowed to come to room temperature, in the sealed container, to
avoid moisture contamination
OCTITE STYCAST US 5532聚氨酯灌封和封裝化合物流動良好并粘附于許多底物。是礦物填充和蓖麻油/ MDI聚氨酯
樂泰 STYCAST US 5532符合UL 94 V-0易燃性
厚度為12.2毫米。
固化材料的典型特性
部分A屬性
25℃下的粘度，mPa•s（cP）50〜100
比重1.23
閃點 - 見SDS
B部分屬性
粘度@ 25℃，mPa&# |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。