HYSOL KL-G450H/HYSOL KL-G450HS/HYSOL KL-G450HCJ/HYSOL KL-G450H (CJ) 電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL KL G450H/HYSOL KL-G450HS/HYSOL KL-G450HCJ/HYSOL KL-G450H (CJ) epoxy molding compoundcontains no bromine, antimony or phosphorus flame retardant.
This material is designed to achieve JEDEC Level 3requirements, at 260°C reflow temperature for a QFP package.樂泰 HYSOL KL G450H meets UL 94 V-0 Flammability at3.175mm thickness.
TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 30Spiral Flow, @ 175°C, cm 110Shelf Life:@ 5oC, months 12Bromide (Br) <5 Electrical Properties:Volume Resistivity, ohms-cm, 250 volts:@ 25oC 19×1015GENERAL INFORMATIONFor safe handling information on this product, consult theMaterial Safety Data Sheet, (MSDS).
This product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selected asa sealant for chlorine or other strong oxidizing materials.
Not for product specificationsThe technical data contained herein are intended as referenceonly.
Please contact your local quality department forassistance and recommendations on specifications for thisproduct.
StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product container labeling.
Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers.
After removal from coldstorage, the material MUST be allowed to come to room temperature, in the sealed container, to avoid moisturecontamination.
The suggested waiting time for a standard 15kg carton box is 24 hours.
樂泰 HYSOL KL G450H / HYSOL KL-G450HS / HYSOL KL-G450HCJ / HYSOL KL-G450H（CJ）環氧樹脂模塑料不含溴，銻或磷阻燃劑。
該材料旨在實現JEDEC 3級要求，在260°C回流溫度下進行QFP封裝.樂泰 HYSOL KL G450H符合UL 94 V-0可燃性，厚度為3.7575mm。
固化材料的特性特性時間@ 175°C，秒30螺旋流量，@ 175°C，cm 110Shelf壽命：@5oC，月份溴溴化物（Br）<5電氣性能：體積電阻率，歐姆 - 厘米，250伏特：@25oC191015GENERAL信息有關本產品的安全處理信息，請參閱材料安全數據（MSDS）。
該產品不 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。