樂泰 3873電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
3873 is a self-shimming, thermally conductive adhesive.
When used with Activator 7387™, it cures rapidly to form a high strength, high modulus, thermoset acrylic polymer.A uniform bondline thickness of 0.127mm results from theincorporation of solid glass spheres.
Recommendedapplications include the bonding of various heat generatingdevices (power devices) to thermal spreaders.TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 2.08Flash Point - See MSDSViscosity, Brookfield - HBT, 25 °C, mPa•s (cP):Spindle TB, speed 0.5 rpm 750,000 to 2,000,000LMSSpindle TB, speed 5.0 rpm 200,000 to 600,000LMS
TYPICAL CURING PERFORMANCECure Speed vs. SubstrateThe rate of cure will depend on the substrate used.
The graphbelow shows the shear strength developed with time on gritblasted steel lap shears compared to different materials andtested according to ISO 4587. (Activator 7387™ applied toone surface)StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.
Optimal Storage: 2 °C to 8 °C. Storage below 2 °C orgreater than 8 °C can adversely affect product properties.
3873是一種自動補片導熱粘合劑。
當與激活劑7387™一起使用時，它可快速固化形成高強度，高模量，熱固性丙烯酸聚合物。均勻的粘合線厚度為0.127mm，來自固體玻璃球的產生。
推薦應用包括將各種發熱裝置（動力裝置）與散熱器結合。
固化材料的特性比重@ 25°C 2.08閃點 - 見MSDSViscosity，Brookfield - HBT，25°C，mPa•s（cP）：主軸TB，轉速0.5 rpm 750,000至2,000,000LMS主軸TB，轉速5.0 rpm 20萬至60萬LMS典型固化性能表現速度與基材固化速率取決于所用的基材。下圖顯示了與不同材料相比，在不同材料上經過噴砂鋼絞線剪切力產生的剪切強度，并根據ISO 4587測試（活化劑7387™應用于表面）StorageStore產品在未打開的容器中的干燥位置。
存儲信息可能會在產品容器標簽。
*佳儲存：2°C至8°C。儲存溫度低于2°C時，可能會對產品性能產生不利影響 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。