ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/ECCOBOND G500HF電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰 ABLESTIK G 500HF is a general purpose epoxy adhesive and sealant that cures to a high gloss finish.
TYPICAL PROPERTIES OF UNCURED MATERIAL Density, g/cm3 1.45Sag Resistance, mils 600 to 900 Press Flow, seconds 30 to 60Shelf Life @ 25°C, months 3Flash Point - See SDSTYPICAL CURING PERFORMANCE Cure Schedule60 minutes @ 125°C or20 minutes @ 150°C or5 minutes @ 175°C For optimum performance, follow the initial cure with a post cure of 2 to4 hours at the highest expected use temperature.
The above cure profiles are guideline recommendations.
Cure conditions (time and temperature) may vary based on customers’ experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures.
StorageStore product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.Optimal Storage: 25°C.
Storage greater than or below 25°C can adversely affect product properties.
樂泰 ABLESTIK G 500HF是一種通用的環氧樹脂膠粘劑和密封劑，可以固化成高光澤度。
固化材料的特性密度，g /cm31.45耐壓，密耳600至900按流量，秒30至60秒25°C以下的壽命，3個閃點 - 見125℃或150分鐘或175℃下5分鐘的125℃或20分鐘的靜態固化性能表為了獲得*佳性能，請在*高預期使用溫度下進行固化2至4小時的初始固化。
以上治療方案是準則建議。
保養條件（時間和溫度）可能會根據客戶的經驗和應用要求以及定制設備，烤箱裝載和實際烤箱溫度而有所不同。
存儲在未打開的容器中的產品在干燥的位置。
存儲信息可能在產品上顯示容器標簽。
*佳儲存：25°C。超過或低于25° |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。