Product Description
®
AD-HD5000 is a thermally cured, PTFE/MoS2 based solid film lubricant with a high molecular weight
phenolic binder system. This coating enhances the torque/tension relationship in fasteners applications,
which allows for a tighter clamp loads and less variability. AD-HD5000 is purchased by a wide variety of
markets, ranging from Automotive to Medical.
Features / Benefits
• Very good wear life • Good color and processing flexibility
• Suitable for Medical ISO 10993 bio-compatibility testing • Very good corrosion and chemical resistance
Markets Typical Applications
• Automotive
• Medical • Fabricated Metal Parts
• Fasteners
Physical Properties
Lubricating Solid: PTFE, MoS2
• Small to medium fasteners • Surgical instruments • Mandrels, castings, and stampings
• Springs, coils, and clamps
Binder: High Molecular Weight Phenolic
Color and Appearance:* Satin Black Finish
Carrier: Solvent Borne
Solids (by weight):* 32% to 36%
Processing Information2
Dry Film Thickness 0.3 to 0.8 mils (8 to 20 microns)
Typical Functional Properties
ASTM Test Method Value
Corrosion Resistance Test Panel ASTM B117 600 hrs. @ 5% Neutral Salt Spray
Test Panel Coating Method 0.8 mil on grit blasted steel panel
Abrasion Resistance ASTM D4060 Good
Coefficient of Friction ASTM D2714 .06 - .08
Operating Temperature Range
Load Carrying Capacity
Wear Life ASTM 2714
ASTM 2714
-100° to 300°F (-73° to 149°C) < 35,000 psi
> 120,000 cycles
Pencil Hardness ASTM D-3363 5H
Film Adhesion ASTM D-2510 Pass
Thermal Stability ASTM D-2511 Pass
Chemical Resistance (ASTM D-2510, Method C)
Isopropyl Alcohol or Ethyl Alcohol Pass
Mineral Spirits or Paint Thinner Pass
Toluene Pass
Acetone Pass
Skydrol 500: Pass
Hydraulic Fluids: Pass Diethanolamine Pass
Hydrochloric Acid (10%) Pass
Sodium Hydroxide (10%) Pass
Distilled Water Pass
Jet Fuels (JP-4): Pass
Tr |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。