ELECTRODAG PF-050電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
Electrodag PF-050 is designed for production of flexiblecircuitry. This material can be used on a variety of substrates.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Solids Content by Weight, % 68.5
Viscosity, Brookfield - RVT, mPa•s (cP):
Spindle 6, speed 20 rpm, @ 30oC 17,500
Density, kg/l 2.39
Theoretical coverage, m2/kg:
@ 10 μm coating thickness 11
@ 25 μm coating thickness 4.4
Shelf Life , from date of qualification in original seal, year 1
Flash Point oC 74
TYPICAL SCREEN PRINTING PROCESS
Recommended Thickness
Dried, μm 7.5 to 12.5
Emulsion Thickness
Solvent resistant emulsion , μm 15 to 25
Recommended Squeegee
Urethane for all screens, durometer 80
Recommended Screen Type
Polyester screen , mesh 195 to 305
Stainless steel screen , mesh 200 to 270 The above cure profile is a guideline recommendation. Cureconditions (time and temperature) may vary based on customers'experience and their application requirements, as well as customercuring equipment, oven loading and actual oven temperatures.
Storage Store product in the unopened container in a cool dry wellventilated area. Storage information may be indicated on theproduct container labeling.Optimal Storage: 5 to 20°C. Storage below 5°C or greaterthan 20°C can adversely affect product properties.
Electrodag PF-050專為生產靈活設計電路。該材料可用于各種基材上。
固化材料的典型特性
固體含量按重量％68.5
粘度，Brookfield - RVT，mPa•s（cP）：
主軸6，轉速20 rpm，@30oC17,500
密度，kg / l 2.39
理論覆蓋率，m2/ kg：
@10μm涂層厚度11
@ 25μm涂層厚度4.4
保質期，自原始印章之日起，*一年
閃點oC74
典型屏幕印刷工藝
推薦厚度
干，μm7.5至12.5
乳液厚度
耐溶劑乳液，微米15〜25
推薦刮刀
聚氨酯用于所有屏幕，硬度80
推薦屏幕類型
滌綸屏，網195〜305
不銹鋼絲網，網眼200〜270
以上治療方案是指導性建議。治愈條件（時間和溫度）可能會根據客戶的經驗及其應用要求，以及客戶固化設備，烤箱加載和實際烤箱 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。