ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/ABLEFILM 550電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
ABLEFILM® 550™ adhesive film is designed for substrateattach and sealing microelectronic packages. This adhesive film gives off methanol, water, and ammonia during cure. Note: Using ABLEFILM® 550™ adhesive in hermetically sealed packages is not recommended.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Work Life @ 25°C, months 6
Shelf Life @ -40°C, year 1
TYPICAL CURING PERFORMANCE Cure Schedule
30 minutes @ 150°C
Alternative Cure Schedule 2 hours @ 125°C
Percent Volatiles
10 x 10cm sample @ 120°C for 20 minutes, % 0.43
Curing film adhesives under pressure to ensure proper wetting of the adherend surfaces is recommended. Pressure requirements will vary from (2 to 200 psi) depending on the severity of the adherends warpage and the stiffness of the adherends. Temperatures are recommended are at the bondline.
Storage
ABLEFILM® products can be stored at -40°C for up to one year. The shelf life of the film is only valid when the material has been stored at the specified storage conditions. Incorrect storage conditions will degrade the performance of the material in final cured properties. Avoid flexing film when frozen.
ABLEFILM®550™粘合膜設計用于基材附加和密封微電子封裝。該粘合膜在固化過程中發出甲醇，水和氨。注意：不建議在密封包裝中使用ABLEFILM®550™粘合劑。
固化材料的典型特性
工作生活@ 25°C，月6
保質期@ -40°C， |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。