特點:（Feature）
自動對位平臺影像系統,控制系統,電/氣部件,采用高精密進口配件從而有效的保證產品的壓接精度和良率,減少多次搬運造成的污染和加工誤差,提高了生產效率
Automatic alignment platform imaging systems, control systems, electrical / pneumatic components, high-precision imported parts so as to effectively guarantee product crimp precision and yield, reduce pollution and processing errors caused by repeated handling, improved production efficiency
用途:(Application）
適用于IC TO LCD的自動對位預壓
Suitable for PC TO LCD AF bit preload
技術參數:（Technical parameyer）
電源: AC220V±10%，50Hz，*大功率1500W;
工作環境: 20℃+/-5℃，干凈，無塵，潔凈房
工作氣壓: 0.5~0.7Mpa、干燥氣源
熱壓時間：1-30
熱電偶類型：K型
加熱方式:恒溫加熱
適合尺寸:1.77”~10.1”
影像系統:自動影像處理系統
外形尺寸:L:800 W:800 H:1400
重量：150
IC TRAK:2”/3”/4”
預壓精度: ≤±3nm
生產節拍:3~6s/pcs(根據尺寸大小有所變化)
工藝流程:自動吸取IC→校正→拍照→待機
人共放LCD→啟動 平臺自動進出對位→IC預壓→平臺進出人工下料
Power: AC220V ± 10%, 50Hz, maximum power of 1500W;
Working environment: 20 ℃ +/- 5 ℃, clean, clean, clean room
Working pressure: 0.5 ~ 0.7Mpa, dry air supply
Heating: temperature heating
Suitable Size: 1.77 "~ 10.1"
Imaging system: automatic image processing system
Dimensions: L: 800 W: 800 H: 1400
IC TRAK: 2 "/ 3" / 4 "
Preload Accuracy: ≤ ± 3nm
Tact: 3 ~ 6s / pcs (depending on size vary)
Process: Automatic draw IC → correction → pictures → Standby
          People were put LCD → start platform automatic access to bits → IC preload → internet access under artificial feeding Cutting out artificial platform
備注：以上設備可根據客戶要求訂做，本設備詳細技術規格請參考本型號規格書。 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。