漢高漢高樂泰樂泰 HHD 8600
技術服務熱線：021-51693135 / 021-22818476
樂泰® HHD 8600™ is a toughened, two component acrylic adhesive system designed with low halogen content for structural bonding and weld/rivet reduction. It is well suited for metal bonding applications where shock and impact resistance is required. The product cures very rapidly forming tough, resilient bonds. Once statically mixed, the two component acrylic cures at room temperature. Cure times can be reduced with the addition of mild heat to the bonded assemblies.
樂泰® HHD 8600™ is formulated with 0.127 mm spacers pre-dispersed within the adhesive to ensure that the adhesive bond area has adequate gap for optimal shock and impact performance. Typical applications include structural bonding of plastic and metal components that must withstand vibrations and impacts such as in portable devices and specialty vehicle markets.
TYPICAL CURING PERFORMANCE
Fixture Time
Fixture time is defined as the time to develop a shear strength of 0.1
N/mm2.
Fixture Time, ISO 4587, minutes:
Mild Steel 5 to 10
Peak Exotherm Temperature
Peak Exotherm Temperature, 10 gram mass:
Peak Temperature Time, minutes 11 to 22LMS
Peak Temperature, °C ≥212
樂泰®HHD 8600™是鋼化、雙組分丙烯酸粘合劑系統設計具有低鹵素含量的結構粘接和焊接/鉚釘還原。它非常適合于金屬粘接應用的沖擊和耐沖擊性是必需的。該產品治愈非常迅速形成堅韌，彈性債券。一旦靜態混合，兩組分丙烯酸在室溫下固化。固化時間可以減少與加入溫和的熱粘結組件。
樂泰®HHD 8600™是用0.127毫米的間隔預先制定的分散在粘合劑確保粘合區域有足夠的間隙為*佳沖擊性能。典型的應用包括塑料和金屬部件的結構結合，必須承受振動和沖擊，如在便攜式設備和特種車輛市場。
固化材料的典型性能
部分：
比重@ 25°C 0.99
粘度，錐板，25°C，MPa（CP）：
物理MCR300 @剪切速率50 min-1的15000 35000lms
閃點-見SDS
B部分：
比重@ 25°C 0.97
粘度，錐板，25°C，MPa（CP）：
物理MCR300 @剪切速率50 min-1的15000 35000lms
閃點-見SDS
混合的:
比重@ 25°C 0.98
粘度，錐板，25°C，MPa（CP）：
錐cp50-1 @剪切 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。