本產品是混合型防水堵漏材料,分A、B、C、D、E、F料,溶解于水后產生高活性水分子,滲透到漏點(只要是水能夠滲透到的地方材料都能滲透到)發生膨脹固化反應,終凝后形成一種耐酸堿、耐腐蝕、耐高低溫、高柔韌性的不透水結晶體,與建筑基層縫隙緊密交聯形成良好粘結。其次D粉料用于縫隙處填補、防霉,*后將E納米高強滲透膠刷在瓷磚縫隙處,其具有的高強粘結抗滲性是普通防水膠的3倍,具有優越的抗滲抗壓效果,從而形成雙層防水保護膜,延長建筑物防水壽命。本產品系針對經裝修后做過防水的樓地面出現滲水及漏水的情況而研發的,其無色、無味、無腐蝕、無污染、無需剔鑿及破壞漏水的部位,可在潮濕或干燥的地磚飾面層直接進行施工。相比其它防水堵漏型材料,本產品具有可自行尋找及修復漏點的獨特性能,且成本低,周期短、操作簡單施工方便即使非專業人士也可輕松完成)。
Performance characteristics;( 性能特點)
1, green non-toxic(綠色環保無毒); 2, colorless transparent(無色透明); 3, strong permeability, sealing pores;(強力滲透密封孔隙)
4, strong adhesion, scrub resistance(粘結力強,耐擦洗);
5, wet base plane can be built(潮濕基面可施工);
6, no need to destroy the original tile decorative layer(無需破壞原有瓷磚裝飾層);
7, construction is simple and convenient, non professionals can construction
(施工簡單方便,非專業人士即可施工.)
(用塑料袋包裹抹布或氣球堵塞地漏口,以免材料流入下水管)
2, take about 15--20 kg tap water, the product A, B in turn into the water, mixing, dissolved, and then C material into the barrel, stirring until dissolved.
(取大約15--20公斤自來水,將產品A、 B依次倒入水內攪拌溶解,再將C料倒入桶內攪拌至溶解)
3. Pour the mixture into the ground. Sweep with a broom at low altitude. (sweep once about 10 minutes)
(將混合好的材料倒入地面,用掃把有低向高處持續掃動.(約10分鐘掃動一次))
4. After about 1 hours, the remaining liquid on the ground condenses into colloidal solids and is removed
(大約1小時后,地面剩余的液體會凝結成膠狀固體,清除干凈)
(基面處理:使用尖銳刮刀或鋼刷將磚,地漏,管道的表面物,油脂清除,使用毛刷清理表面灰塵等雜質.將D料按照1:0.3(D料:水)攪拌均勻之后填 |
 |
|