普達系列產品廣泛應用于機械,動力,冶金,電力,電子,醫藥,采礦,包裝,食品,紡織,運輸,市政建設,軍工等行業,為您提供完善的壓縮空氣空氣動力解決方案。
高效螺桿主機的設計特點The Lastest-Generation High Efficiency Screw Rotor
1 大功率的主要機型都采用直連,在低轉速的同時,減少了故障源,改善了主機的受力狀況。
2. 采用世界先進的重載軸承和軸封。
3. 噪聲低減少對耳膜的刺激。
4. 主機結果簡單合理,成熟可靠,故障率低,易于裝配和維護。
1. The high-power models is used direct connect, reduce the fault source at a low speed and
improve the stress condition of the host.
2. Using of the worlds advanced heavy-duty bearing sand shaft seals.
3. Low noise reduce the stimulation of the eardrum.
4. The host structure is simple and reasonable, mature and reliable, low failure rate, easy assembly and maintenance.
高效可靠的先進主機采用世界名牌主機。其獨特的設計,完全滿足您對機組性能和效率的要求。經濟的運行成本良好的環境適應性High efficient and reliable advanced hostThe world famous host. Its unique design, fully meet your requirements on the performance and efficiency of the compressor systems.Economic operation costGood environmental adaptability
詳細參數:
型 號
KEG-132
容積流量[M3/min]
25.2/24.0/21.0/18.3
工作壓力[MPa]
0.7/0.8/1.0/1.2
壓縮機級數
單級
環境溫度[℃]
-5~+45
冷卻方式
風冷
進水溫度[℃]
-
進水壓力[MPa]
-
排氣溫度[℃]
<環境溫度+15
潤滑油量[L]
-
噪音[dB(A)]
75+2
驅動方式
直連傳動
電源[V/ph/Hz]
380/3/50
電機功率[Kw]
132
啟動方式
Y-▲啟動
外型尺寸[mm]
1900*1250*1600
機組重量[kg]
3500
出口管徑[mm/Inch]
DN-65
冷卻水進出口管徑[Inch]
- |
 |
|