產品特性:
備有“斯寶特”SP-600G/560G、“潔霸”JE-600G/560G可選;
該系列頂篷棉主要應用表面噴涂行業,專門為噴涂室末端過濾而設計,由抗斷裂的合成纖維構成的高性能熱熔法無紡布加工而成;
遞增結構,多層逐級加密技術,即往純凈空氣方向的纖維密度逐漸增大,較高過濾效率,延長使用壽命;
粘性處理,因粘劑完全滲透介質而使塵埃粒子無法通過,得到全面過濾的空氣均勻擴散,形成層流狀態,達到*佳的噴涂效;
符合防火分類標準歐洲DIN53438-F1和美國UL900-Class2;
卷面印有EN-779標準分類,DIN標識,新洪源的注冊商標;
濾料出風面致密、覆網加固,初阻力低、容塵量高、阻燃性好、使用壽命長、經濟可靠;
耐濕性強,可達100%相對耐濕度。
Speciality:
SP-600G/560G; JE-600G/560G
The series of ceiling filters are mainly used in surface spray-paint industry, especially for final filtration in spray booth, which is processed by high-powered nonwovens of antibreak synthetic fiber.
With gradual technology, the fiber density increases gradually toward pure air, high filter efficiency, extended working life.
Due to complete penetration of viscosity in media, dust particles can not pass. Fully filtered air evenly spreads to form a laminar flow state to achieve the best spray results.
Conforming to European DIN53438-F1 and American UL900-Class2
The outlet side is printed with EN-779 standard classifications, DIN logo, the registered trademark of SHW.
Dense outlet side, low initial resistance, high dust holding capacity, good fire retardant and long working life, economical and reliable, the surface is reinforced by covered net scrim.
Moisture resistance, up to 100% relative humidity
技術參數 (Specification):
類型
Type 級別
Filter
Class 平均
計重效率
Average
Arrestance 初始效率
[比色法]
Initial Efficiency 測試風速
Nominal
Velocity
(m/s) 額定風量
Rated
Airflow
(m3/h) 初阻力
Initial
Resistance
(Pa) 終阻力
Final Resistance
(Pa) 容塵量
Dust Holding Capacity
(g/m2) 持續耐溫
Continuous
Temperature
(℃) 瞬間耐溫
Instantaneous Temperature
(℃) 厚度
Thickness
(mm) 標準尺寸
Sizes
SP-600G F5 98% 55% 0.25m/s 900 m3/h 30Pa 450Pa 460
g/m2 100℃ 120℃ 22mm 1.6*21M
2.0*21M
SP-560G F5 96% 50% 0.25m/s 900 m3/h 25Pa 450Pa 400 g/m2 100℃ 120℃ 25 mm 1.6*21M
2.0*21M
JE-600G F5 98% 55% 0.25m/s 900 m3/h 30 450Pa 460
g/m2 100℃ 120℃ 22mm 1.6*21M
2.0*21M
JE-560G F5 96% 50% 0.25m/s 900 m3/h 25 450Pa 400 g/m2 100℃ 120℃ 25 mm 1.6*21M
2.0*21M
注:可按客戶要求訂做
Note: Other specifications are available on request |
 |
|