Product name Jean printing paste 咨詢熱線：13480450623刁麗鮮 QQ：2300608734
State Paste
Packing 25KG/drum for white, 20KG/drum for clear
Storage 6 months in cool place
Application Suitable for jean, nylon, TPU, PU etc.
Features 1. Stone washing、snow washing、poaching、ferment washing、acid-washing,
thermophilic digestion resistance.
2. Extra fastness
3. SGS detecting passed, no PVC, no heavy metal, no NPEOs
Mix proportion Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?% + fixing agent 3%
Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?% + fixing agent 3%
Printing process 1. Printing with clear printing paste for 1-2 times
2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly.
3. Printing again for 3-4 times (3-4 scrapes per time).
4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃
5. Finish.
Attentions 1. Please drying the paste surface with cold air each time before re-printing.
2. The pigment is max 12%, otherwise it’ll be easily faded.
3. 1-3% curing agent is suggested to make better washing ability.
品名 特強石磨牛仔漿 咨詢熱線：13480450623刁麗鮮 QQ：2300608734
外觀 糊狀
包裝 白膠漿25KG/桶，透明漿20KG/桶
貯存期 常溫下6個月
應用 牛仔布（涂層布，壓光布除外）, 尼龍布，也可用于TPU、PU等皮革等
賣點 1. 耐強石磨洗、雪花洗、漂洗、酵素洗、酸洗、耐高溫蒸煮、藍天白云等
2. 不粘手超柔軟，高亮度
3. 符合美國ASTM對鄰苯二甲酸脂和歐盟EN71 Part 3對重金屬含量的要求
調配比例 印淺色：牛仔白膠漿70-80% + 牛仔透明漿20-30% + 固化劑3% + 色種？%
印深色：牛仔白膠漿20-30% + 牛仔透明漿70-80% + 固化劑3% + 色種？%
工藝流程 1. 絲網選用80-100目，用絲印硬方刀75度刮印, 以透明漿打底1-2次
2. 將白膠漿，透明漿，色種，固化劑攪拌勻印2-3次
3. 24-48小時自然干燥，或150-180度焙烘1-3分鐘
注意事項 1.加入固化劑的石磨膠漿必須在4~8小時內用完
2.每色*一板必須用力刮4~6刀(漿體充分進入纖維深處才能確保特強牢固度)!
3.固化劑比例必須準確并充分攪拌均勻!
4.必須保證漿層完全干透才能進行洗水!
咨詢熱線：13480450623刁麗鮮 QQ：2300608734 |
 |
|
手機站
您當前位置是：商業機會 >> 化工 >> 化工助劑 >> 供應特強石磨牛仔漿
聯系信息