汽車內飾板高頻熱合機(又名汽車內飾件高頻焊接機,汽車內飾件高周波熔接機)做汽車內飾的機器-汽車內飾熱合機由電子管自激振蕩器產生電磁場,被加工塑膠件在上、下電極間的電磁場中,其內部分子被極化而相互運動磨擦自身產生熱量,在模具的壓力下達到熔接的目的。利用能量把兩件或多件塑膠工件熔接起來,透過高周波使物料生熱及熔合在一起。經這種熔接方法而成的工件,堅固度和膠料本身的堅固度一樣。
嚴格按照國際“無線電干擾委員會”(CISPR)的規定,采用工業波段27.12MHZ,并設計有高周波穩定器和高周波漏磁抑制裝置,對外界設備的于擾極小。
u The industrial wave band of 27.12 / 40. 68MHZ is adopted in accordance with the "International Special Committee On Radio Interference (CISPR)". A frequency stabilizer and a long frequency magnetic leakage suppressor are provided, so the interference caused to other equipments is extremely low.
高靈敏度火花抑制電路,能準確檢出產生火花的不平衡電流,于產生火花瞬間迅速切斷振蕩回路抑制火花,模具、原料及產品的損害降到*低程度,同時警告燈也會發亮警告。
u The high sensitivity spark suppression circuit is used for testing unbalanced current of sparks. The oscillator circuit can be cut immediately if any spark is caused (The alarm light will be ON at this time) so as to ensure the lowest damage rate to moulds, materials and products.
四導柱定位精度高,使用范圍廣,出力大穩定性好,設有過壓、過流保護裝置,在工作異常時可自動切斷高壓。
u The high precision and widely used four-column positioning design is adopted, ensuring reliable operation. The overvoltage and over current protection is provided for disconnecting high voltage during abnormal conditions so as to protect the oscillator and rectifier and prevent frequency drift due to misoperation.
電話聯系:023-62511373
機型Model KS-15000S
電源入力Power supply 3P 380 30KVA
輸出功率Output power 15KW
振蕩管Oscillating tube 8T85RB
加壓方式Boosting mode 氣壓(0.8T-2T)或液壓(0.8-10T)
Pneumatic(0.8T-2T)or Hydraulic(0.8-10T)
上下電極*大間距(下)Max. electrode spacing(Lower) 1100mm*1500mm
上下電極*大間距(上)Max. electrode spacing(Upper) 1000mm*1300mm
設備外形尺寸(L*W*H)
Overall size(L*W*H) 3000*3000*2150(mm)
凈重(KG)
Net weight(KG) 隨配置而有所不同
According to the configuration |
 |
|