CAMPUS® datasheet | Delrin® 100P NC010
This datasheet of Delrin® 100P NC010 from DuPont Engineering Polymers is provided by the international plastics database CAMPUS.
This datasheet includes:
流變性能 - 機械性能 - 熱性能 - 電性能 - 其它性能 - 流變計算用參數 - 函數
Delrin® 100P NC010 | POM | DuPont Engineering Polymers 材料文字說明
ISO 9988: POM-H,MNR,1-2
Common features of Delrin® acetal resin include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating and available in a variety of colours and speciality grades.
The good melt stability of Delrin® acetal resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-17 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics and consumer goods industries.
Delrin® 100P is an unreinforced, high viscosity acetal homopolymer for injection molding. It provides maximum toughness without modification, has improved processing thermal stability for low deposit molding in demanding processing conditions.
Design guide
Food compliance:
Specific statement for EU available
Typical applications:
Moulded parts, such as highly loaded gears, plain bearings and snap-fits.
top
流變性能 價值 單位 測試標準
熔體體積流動速度, MVR 1.9 cm³/10min ISO 1133
溫度 190 °C ISO 1133
載荷 2.16 kg ISO 1133
模塑收縮率, 平行 2.1 % ISO 294-4, 2577
模塑收縮率, 垂直 1.9 % ISO 294-4, 2577
top
機械性能 價值 單位 測試標準
拉伸模量 2900 MPa ISO 527-1/-2
屈服應力 70 MPa ISO 527-1/-2
屈服伸長率 25 % ISO 527-1/-2
名義斷裂伸長率 45 % ISO 527-1/-2
拉伸蠕變模量, 1h 2700 MPa ISO 899-1
拉伸蠕變模量, 1000h 1500 MPa ISO 899-1
無缺口簡支梁沖擊強度, +23°C N kJ/m² ISO 179/1eU
無缺口簡支梁沖擊強度, -30°C 350 kJ/m² ISO 179/1eU
簡支梁缺口沖擊強度, +23°C 14 kJ/m² ISO 179/1eA
簡支梁缺口沖擊強度, -30°C 11 kJ/m² ISO 179/1eA
top
熱性能 價值 單位 測試標準
熔融溫度, 10°C/min 179 °C ISO 11357-1/-3
熱變形溫度, 1.80 MPa 95 °C ISO 75-1/-2
熱變形溫度, 0.45 MPa 160 °C ISO 75-1/-2
維卡軟化溫度, 50°C/h 50N 160 °C ISO 306
線性熱膨脹系數, 平行 110 E-6/K ISO 11359-1/-2
線性熱膨脹系數, 垂直 110 E-6/K ISO 11359-1/-2
1.5mm名義厚度時的燃燒性 HB class IEC 60695-11-10
測試用試樣的厚度 1.5 mm IEC 60695-11-10
UL注冊 UL - -
厚度為h時的燃燒性 HB class IEC 60695-11-10
測試用試樣的厚度 0.8 mm IEC 60695-11-10
UL注冊 UL - -
燃燒性－氧指數 17 % ISO 4589-1/-2
top
電性能 價值 單位 測試標準
相對介電常數., 100Hz 3.8 - IEC 60250
相對介電常數., 1MHz 3.7 - IEC 60250
介質損耗因子, 100Hz 200 E-4 IEC 60250
介質損耗因子, 1MHz 40 E-4 IEC 60250
體積電阻率 1E12 Ohm*m IEC 60093
表面電阻率 >1E15 Ohm IEC 60093
介電強度 32 kV/mm IEC 60243-1
相對漏電起痕指數 600 - IEC 60112
top
其它性能 價值 單位 測試標準
吸水性 1.4 % 類似ISO 62
吸濕性 0.3 % 類似ISO 62
密度 1420 kg/m³ ISO 1183
top
流變計算用參數 價值 單位 測試標準
熔體密度 1170 kg/m³ -
熔體 0.22 W/(m K) -
熔體的比熱 3000 J/(kg K) -
top
函數 |
 |
|
手機站
您當前位置是：商業機會 >> 化工 >> 塑料原料 >> 美國杜邦100P 
聯系信息