英威達INVISTA TORZEN™ G4000HSL 物性特點: PA66樹脂, GF40%的玻璃纖維增強,熱穩定,可注塑成型和擠出,適合于需要高的拉伸強度和尺寸穩定性的應用。顏色規格有本色NC01和黑色BK20.
TORZEN™ G4000HSL NC01 is a 40% glass reinforced, heat stabilized, natural, PA66 resin suitable for many injection molding applications where high tensile strength and dimensional stability are needed.
英威達INVISTA TORZEN™ G4000HSL 物性數據表:
Density 1.47 g/cm3 ISO 1183
Glass Fiber Content 40 % ISO 3451/4
Mold Shrinkage, 2.0 mm, Normal 0.85 – 0.95 % ISO 294-4
Mold Shrinkage, 2.0 mm, Parallel 0.35 – 0.45 % ISO 294-4
Water Absorption - 24 hours 0.70 % ISO 62
Water Absorption - Equilibrium @ 50% RH 1.1 % ISO 62
Tensile Strength at Break 225 MPa ISO 527
Elongation at Break 3.0 % ISO 527
Tensile Modulus 12,300 MPa ISO 527
Flexural Modulus 10,300 MPa ISO 178
Flexural Strength 320 MPa ISO 178
Notched Charpy at 23°C 13 kJ/m2 ISO 179
Notched Charpy at -40°C 10 kJ/m2 ISO 179
Melting Temperature, 10°C/min 262 °C ISO 11357
HDT at 0.45 MPa 260 °C ISO 75
HDT at 1.82 MPa 250 °C ISO 75
PA66 美國英威達TORZEN™ G4000HSL 注塑參數:
Drying Temperature 80 ℃
Drying Time 3-4 hours
Rear 250-270 ℃
Middle 270-290 ℃
Front 270-290 ℃
Nozzle 270-290 ℃
Processing Temperature (melt) 280-300 ℃
Mold Temperature 50-90 ℃
Back Pressure 2-10 bar
Vent Depth 0.007-0.04 mm
Suggested Moisture (max) 0.18 wt%
Suggested Moisture (min) 0.08 wt%
東莞市久隆塑膠原料有限公司現貨供應以下美國英威達INVISTA TORZEN™ PA66尼龍產品:
PA66 美國英威達INVISTA TORZEN™ NPD-003
PA66 美國英威達INVISTA TORZEN™ NPD-004
PA66 美國英威達INVISTA TORZEN™ NPD-013
PA66 美國英威達INVISTA TORZEN™ NPD-026
PA66 美國英威達INVISTA TORZEN™ G4000HSL NC01
PA66 美國英威達INVISTA TORZEN™ G5000HSL NC01
如需訂購或了解 英威達INVISTA TORZEN™ G4000HSL等產品詳細物性數據表注塑參數MSDS物質安全說明書UL黃卡及*新價格,歡迎全國新老客戶來電咨詢洽談! |
 |
|