"Sick GTE6-N1211 Description
PinPoint LED for a bright, precise light spot
Durable metal threaded inserts
SICK ASIC technology - the result of decades of experience in photoelectric sensors
Large, user-friendly potentiometer
Large, bright indicator LEDs
IP 67 enclosure rating
Your benefits
Easy alignment and precise object detection due to a highly visible PinPoint LED
Quick and easy mounting and high durability due to threaded metal inserts
SICK ASIC technology provides high performance, excellent reliability and crosstalk immunity
Easy to adjust due to large, user-friendly potentiometers
Easy to monitor due to large, bright indicator LEDs
Easy installation with SICK accessories
Features
Dimensions (W x H x D):: 12 mm x 31.5 mm x 21 mm
Sensing range max.: 300 mm 1)
Sensing range: 250 mm
Housing desig (light emission): Cuboid
Light source: PinPoint LED 2)
Type of light: visible red light
Wave length: 650 nm
Sensitivity adjustment: Potentiometer, 5-turn
Sensor/detection principle: Photoelectric proximity sensor, energetic
Light spot (distance): 7 mm (90 mm)
1) Object with 90 % reflectance (referred to standard white DIN 5033) 2) Average service life of 100,000 h at TA = +25 °C
Mechanics/electronics
Enclosure rating: IP 67
Supply voltage: 12 V DC ... 24 V DC 1)
Residual ripple: ± 10 % 2)
Power consumption: ≤ 30 mA 3)
Switching output: NPN, light/dark-switching, selectable via light/dark selector, open collector
Output current Imax.: 100
Response time: < 1.25 µs 4)
Switching frequency: 500 Hz 5)
Connection type: Cable, 3-wire, 2 m 6)
Cable material: PVC
Conductor cross-section: 0.14 mm2
Circuit protection: A
B
D 7) 8) 9)
Weight: 60 g
Housing material: ABS/PC
Optics material: PMMA
Ambient temperature, operation: -25 °C ... 55 °C
Ambient temperature, storage: -40 °C ... 70 °C
Polarisation filter: -
Signal voltage NPN HIGH / LOW: approx. VS / ca. 3 V
AS-Interface-Chip: -
1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS 3) Without load 4) Signal transit time with resistive load 5) With light/dark ratio 1:1 6) Do not bend below 0 °C 7) A = VSconnections reverse-polarity protected 8) B = inputs and output reverse-polarity protected 9) D = outputs overcurrent and short-circuit protected
" |
 |
|
手機站
您當前位置是：商業機會 >> 電工電氣 >> 電工儀器儀表 >> GTE6-N1212施克SICK光電開關
聯系信息