芯線絕緣押出機Core wire
機器特點：
■用途廣:適用于導體單層絕緣押出 / Foam-Skin化學發泡雙層絕緣押出 / 單層+注條絕緣押出Used abroad:Used in conductor single layer extrusion/ Foam-Skin insulation extrusion/single layer +
■產能大:優化螺桿設計,螺桿經久耐用,不粘膠,不脫鉻,換色快,線速高,產能大High output:Optimization screw desgin,screw useful ,none viscose ,not escape the chromium and so on.
■品質高:押出產品同心度:93~97%;外徑公差:實心+/-0.005,發泡+/-0.008;電容值:+/-0.5 High quality:The production of extrusion :Concentricity93-97%,out DIA. :±0.005,foam skin±0.008Capacitance:±0.5
■溫控準:采用SCR功率控制器,配進口優質溫控表,機身溫度控制在+/-1℃以內 Tempreture controled :Used SCRpower control machine,with the import tempretuer control,the tempretuer of machine bodycontroled in ±1℃.
■操控易:人性化的機器設計配合友好的操作接口,機器操作更簡單,更省力,更方便 Control esay: Human screen touch,operation will be more easyer,more ,and more conviniance.
■占地少:將傳統的蓄線、引取、收線、計米、火花等輔機改為整體結構,布局緊湊,總長度減少5米以上Save place:tradition ,the toatel length reduce more than 5m.
機器型號
Type HT030 HT040 HT050 HT060
機器用途
Pourpose 適用于導體單層押出,Foam-Skin化學發泡雙層押出,單層+注條押出
Used in conductor single layer extrusion,Foam-Skin chemical double layer extrusion,single layer+pours the strip extrusion
芯線規格
Core Specification AWG36~AWG30 AWG32~AWG28 AWG30~AWG26 AWG28~AWG20
押出材料
Extrusion material HDPE、Foam-PE、PP、PU 、PVC、SR-PVC
螺桿參數
Screw parameter 長徑比:26~28 壓縮比:2.7~3.2 螺桿材料:SACM眞空熱處理,表面研磨鍍鉻拋光
L/D ratio Compression ratio :2.7-3/2 screw materail:SACM vacuum heat treatment
溫控段數(機筒+機頭)
Tempretuer group (Body+Head) 3+3 3+3 4+3 4+3
加熱功率 6KW 8KW 11KW 15KW
主機動力
Power of main machine 7.5HP 10HP 15HP 20HP
*高產量
The highest output 30KG/H 45KG/H 60KG/H 85KG/H
*高線速
limted wire speed 300M/MIN 400M/MIN 600M/MIN 800M/MIN
活動水槽
cooling station 伸縮式活動水槽 / 恒溫活動水槽,加熱功率9KW,移動量500,總長度1.7M,配雙段式拭水器
Extension type cooling station/ constant temperature cooling station ,heating power 9KW,emigration quantity 500,length1.7M ,with duble water
U型水槽長度
Utype cooling length 6M 8M 8M 10M
蓄線參數
Accumulate parameter Φ120~180蓄線輪,固定輪10溝+移動輪11溝,水平 / 斜式蓄線架,長度9M,蓄線量200M
Φ120-180 accumulate wheel,fix wheel 10pcs+moving wheel,standard/inclined accumulate shift ,length 9M,accumulate quantity200M
引取功率
Drum power 3HP 3HP 3HP 5HP
放線型式
Pay-off type 琴式張力被動放線 / 無軸式動力放線,擺桿滑塊式張力器,設斷線保護,適用于Φ300~500線軸Pay-off/none shift power take-up,oder protection,used in 300-500shift.
收線型式
Take-up type 雙軸收線,光桿扁平電纜,2HP馬達配變頻調速,可單動/聯動運轉,米到停機,適用于Φ400~500線軸Double shift take-off,2HPmotor with Frequency conversion adjust speed,could be single/linkage running,machine stop with the oder meter over,suitablein 400-500shift. |
 |
|
手機站
您當前位置是：商業機會 >> 機械及行業設備 >> 其他行業設備 >> 供應30-60芯線押出機,電子線押出機
聯系信息