專業供應: 惠州中空板,河源中空板,惠州中空箱,河源中空箱
河源中空箱是有多片的河源中空板組成的箱子形狀,主要在物流行業有著重要的地位,它可以減輕物流包裝運輸成本,因為河源中空箱是一種可以回收利用的可再生能源。
在產品的制作生產方面,它主要采用的是注塑成型加工成型的:也就是受熱融化的材料由高壓射入模腔,經冷卻固化后,得到成形品的方法。該方法適用于形狀復雜部件的批量生產,是重要的加工方法之一。
Injection molding process
1.and nozzle temperature: nozzle temperature is usually slightly lower than the highest temperature nitrogen-treated barrel, this is to prevent melt materials in straight from the possibility of nozzle "salivate phenomenon". Low temperature also can't nozzle, otherwise will cause molten material of early and nozzle blocking, or because of the early into the cavity and influence for the performance of the products.
2.mold temperature: mold temperature the internal performance of products quality and apparent influence. Mould temperature height decide in plastic or crystalline, the size of the products and structure, performance requirements, and other process conditions (melting temperature, injection velocity and material injection pressure, molding cycle, etc.).
中空箱注塑過程
(1)噴嘴溫度:
噴嘴溫度通常略低于料筒,*高溫度,這是為了防止直接從熔化材料的可能性“流涎現象”噴嘴。低溫也不能噴嘴,否則將導致熔融材料的早期和噴嘴堵塞,或由于早期進入腔和影響產品的性能。
(2)模具溫度:
河源中空箱固定模型采用的模具溫度內部的產品性能質量和明顯的影響。模具溫度的高低決定在塑料或水晶,大小的產品及結構、性能要求、及其他工藝條件。
http://www.bzclc.com 膠粘帶 美紋膠 醋酸布膠帶 金手指膠帶 封箱膠帶
http://www.hztlc.com 深圳陶粒,廣州陶粒,汕頭陶粒,東莞陶粒,廣西陶粒,江西陶粒
http://www.hzbvb.com 惠州中空板,河源中空板,惠州中空箱,河源中空箱
http://www.qc718.com 惠州seo 惠州網站優化 惠州百度優化 惠州谷歌優化
http://www.hzzssj.com 裝飾公司 裝修公司 惠州別墅裝修 惠州酒店裝修
http://www.ymclc.com 研磨材料 干砂紙 水砂紙 砂紙 研磨拋光材料 拋光研磨材料
http://www.szylpack.com 深圳打包機 東莞打包機 |
 |
|