● 直接式加壓機構，應急性能好，焊接速度快
導向部采用磨擦力小的特殊材料，電磁氣閥與氣缸直接連接，加快動作反應速度，提高打點速度，并可減少空氣流動的損耗。
● 任意調整加壓速度
可任意調整加壓頭的下降速度，緩和了對被焊物加壓時的沖擊，也減少了噪音。
● 安全、使用方便的高性能氣路系統
過濾杯設有護罩，可防止杯子破損時的碎片飛濺，亦可保護從外部所受碰撞的沖擊，杯子和護罩可裝卸，檢修容易。
● 采用節水型強制冷卻方式
采用循環式冷卻水，避免水的浪費，大幅度減少冷卻水量。
● 高牢固強度的機體結構
具有抗沖擊、振動的剛性，可防止加壓時的電極頭滑動，實現穩定焊接。
● 上部絕緣，簡單實用
二次導體采用上部絕緣方式，要避免鐵屑的附著或下座安裝焊接工裝時易產生的絕緣部位的短路事故。
● 主回路采用大功率SCR無觸點開關
主回路采用水冷大功率可控硅元件，輸出電源強勁、穩定，可靠性強。
Direct press mechanism,good urgency performance and high welding speed
The guide uses special material with low fuction.
Electromagnetic air value is directly connected with air cylinder to quicken reaction.
Adjustable pressing speeds
Down speed of the press head can be adjusted as necessary,thus to relieve pressing shock and reduce noise.
Safe,easy-to-use and high-performance airline system
Filter cup is equipped with protection cover,which can prevent scrap can be when cup breaks and can protect filter cup from external shock,The cup and cover are removable and maintenance canbe performed easily.
Water-saving type forced cooling system
Cycle cooling water system can avoid waste of water,thus largely reduce required amount of cooling water.
High-strength body structure
It has the rigidity enough to withstand shocks and vibrations,prevent electrode slide and stabilize welding process.
Upper insulation, simple to use
The secondary conductor uses upper insulation arrangement,this can avoid short circuits all the insulation portion when the lower base is mounted with welding tooling.
Main circuit uses large-power SCR contactless switch
Main circuit uses water-cooled large power sili controlled rectifying element,the power output is powerful,stable and reliable. 項目(單位) 型號 DN-16 DN-25 D(T)N-40
額定容量 KVA 16 25 40
額定初級電壓 V 380 380 380
額定頻率 Hz 50/60 50/60 50/60
*大短路電流 A 10500 13500 17500
*大焊接輸入 KVA 30 45 73
負載持續率 % 50 50 50
臂伸尺寸 mm 220X500 220X500 220X500
*大加壓力 N 3900 3900 6000
電極行程 mm 60 60 60
冷卻水量 L/min 3 3 4
重量 kg 200 220 280
電極尺寸 電極頭 mm φ13 φ13 φ16
電極握桿 mm φ20X180 φ20X181 φ25X190
電極臂 mm φ50X150 φ50X150 φ60X200
凸焊臺 mm 110X130
焊接能力 低碳鋼二塊疊焊 mm 2.0+2.0 2.5+2.5 3.0+3.0
-------------------------------------------------------------------------------- |
 |
|
手機站
您當前位置是：商業機會 >> 機械及行業設備 >> 焊接、切割設備與材料 >> 供應點焊機 氣動交流點焊機 油箱支架點焊機 螺母點焊機 
聯系信息