本設備主要用于將直徑≤Ф1200mm的普通輪胎和全鋼絲子午線輪胎破碎成50*50mm左右的膠塊,以便后續中碎工序的進行。其結構主要包括：入料門、電機、傳動系統、破碎室、篩選機構和機架等零部件。
該設備的工作原理是：
電機通過傳動系統帶動破碎室的刀盤轉動，然后將已經去除胎唇鋼圈的外徑≤Ф1200mm的輪胎用輸送機送入該設備的入料門，輪胎經由入料門進入破碎室，刀盤以剪切和撕裂的方式對輪胎進行破碎，在破碎過程中，小于或者等于50*50的物料從圓網篩中漏出，進入后續工序；大于50*50的物料經圓網篩返回到破碎室進行循環破碎，直至膠塊大小符合要求后排出破碎機。
設備特點：
采用圓滾剪切的方式，優化了受力狀況，減少了旋轉刀盤被卡死的現象，同時也減少了對破碎室受力狀況。
采用硬齒面齒輪減速器，具有承載能力大，效率高，使用壽命長等優點。
采用高硬度耐合金焊條堆焊刀盤刃口，使用壽命長，可進行反復堆焊修補刀刃。
刀軸拆裝快捷，安裝維修方便。
Tire crusher is applicable for both radial tire and bias tire. This device is designed to crush tires into blocks of 50*50 cm for further processing. It is formed with in feed funnel, motor, gear transmission system, crushing chamber, classifier, main body, etc.
Working principle: the blades in the crushing chamber are driven turning by the main motor to shear the tires with outer diameter less than 1.2m from the in feed funnel. During the shearing process, blocks less than or equal to 50*50mm are filtered out through the screen, bigger size will be send back for crush again until smaller than the above mentioned size.
Advantages:
Double shaft shearing method optimizes the drive force and avoids jam and mean while reduces the moment of overturning
Cycloidal-pin gear speed reducer planetary reducer features high working capacity, high efficiency, low noise, low volume and long lifetime.
Horny alloy blade edge can be shaped several times to ensure long lifetime for blade.
Easy shaft replacement and maintenance.
類別（PSJ1200） 參數
主電機功率（kW）Main power 2*37
刀盤數量（PCS）Blade QTY 22
主軸轉速（r/min）Turning speed 12
粉碎輪胎*大外經（mm）Blade length 1200
圓滾篩轉速（r/min）Screen turning speed 0.7～3
出料規格（mm）Output size 50*50
產能（kg/h）productivity ≤2000
重量（kg）Weight 14500 |
 |
|
手機站
您當前位置是：商業機會 >> 機械及行業設備 >> 工藝品加工設備 >> 廢舊輪胎處理設備輪胎破碎機
聯系信息