DOWTHERM SR-1Dowtherm SR-1美國陶氏化學的低溫冷媒,冷卻液,機器防腐冷卻劑
Inhibited Ethylene Glycol-based Heat Transfer Fluid
DOWTHERM* SR-1 heat transfer fluid
is a formulation of 95.5 weight percent
ethylene glycol and a specially designed
package of industrial corrosion
inhibitors. The fluid is dyed fluorescent
pink for leak detection purposes.
Solutions in water provide freeze
protection to below -50°C (-60°F) and
burst protection to below -73°C (-100°F).
Recommended use temperature range:
-50°C (-60°F) to 120°C (250°F).
Suitable applications: closed-loop,
water-based HVAC, process heating
and cooling, food industry applications
within temperature range
For health and safety information for
this product, contact your Dow sales
representative or call the number for
your area on the second page of this
sheet for a Material Safety Data Sheet
(MSDS).
*Trademark of The Dow Chemical Company
Typical Freezing and Boiling Points of DOWTHERM SR-1 Fluid†
Typical Concentrations of DOWTHERM SR-1 Fluid
Required to Provide Freeze and Burst Protection
at Various Temperatures
Percent DOWTHERM SR-1 Fluid
Concentration Required
Temperature For Freeze Protection For Burst Protection
°C (°F) Volume % Volume %
-7 (20) 16.8 11.5
-12 (10) 26.2 17.8
-18 (0) 34.6 23.1
-23 (-10) 40.9 27.3
-29 (-20) 46.1 31.4
-34 (-30) 50.3 31.4
-40 (-40) 54.5 31.4
-46 (-50) 58.7 31.4
-51 (-60) 62.9 31.4
NOTE: These figures are examples only and may not be appropriate to your situation. Generally,
for an extended margin of protection, you should select a temperature in this table that is at least
3°C (5°F) lower than the expected lowest ambient temperature. Inhibitor levels should be adjusted
for solutions of less than 30% glycol. Contact Dow for information on specific cases or further
assistance.
ATTENTION: These are typical numbers only and are not to be regarded as specifications. As use
conditions are not within its control, Dow does not guarantee results from use of the information聯苯的SR - 1
抑制乙烯乙二醇基有機熱載體
聯苯* SR - 1的傳熱流體
是一種重量的百分之95.5制訂
乙二醇和一個特別設計的
包工業腐蝕
抑制劑。流體是熒光染色
粉紅色的管道泄漏檢測的目的。
在水溶液中提供凍結
保護低于50ТАC(-60ТАF)和
爆裂保護低于73ТАC(-100ТАF)。
推薦使用溫度范圍:
-50ТАC(-60ТАF)到120ТАC(250ТАF)。
適合應用:閉環,
水性暖通,工藝加熱
和冷卻,食品行業的應用
溫度范圍內
基于健康和安全信息
此產品,請聯系陶氏銷售
代表或撥打電話號碼為
您所在地區在此第二頁
表的材料安全數據表
(MSDS)上。
*商標的陶氏化學公司
典型的凍結和聯苯的SR - 1Fluidт沸點
熱媒的SR - 1液體濃度的典型
需要提供凍結和突發保護
在不同溫度
百分比聯苯的SR - 1液體
集中必要
凍結溫度突發重點保護
ТАC(ТАF)音量%卷%
-7(20)16.8 11.5
-12(10)26.2 17.8
-18(0)34.6 23.1
-23(-10)40.9 27.3
-29(-20)46.1 31.4
-34(-30)50.3 31.4
-40(-40)54.5 31.4
-46(-50)58.7 31.4
-51(-60)62.9 31.4
注意:這些數字僅為示例,可能不適合您的情況。一般來說,
為保護擴展緣,你應該選擇一本表溫度至少
3ТАC(5ТАF)比預期的*低環境溫度低。抑制劑水平應調整
對小于30%的乙二醇溶液。聯系陶氏對具體案件或進一步資料
援助。
注意:這些都是典型的數字而已,不能作為規格用。由于使用
條件是其控制范圍內沒有,道指不保證從信息的使用效果 |
 |
|