SuperGlide S6 ER70S-6 DC+ Lincoln's premium bare, mild steel MIG wire, SuperGlide® S6 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. S6 will tolerate higher levels of surface contaminants than ER70S-3 or S-4 electrodes. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. High silicon and manganese deoxidizer levels. SuperGlide® S6 MIG wire is the choice for you when a bare or non-copper coated ER70S-6 wire is preferred. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.
SuperArc L-50 ER70S-3 DC+ Our most popular MIG wire, SuperArc® L-50, premium copper coated wire, is an excellent choice for 50,000 psi (345 MPa) yield strength, carbon steel base materials. SuperArc® L-50 has moderate levels of silicon and manganese for deoxidation and cleaning action. Designed for use on clean, oil-free, and rust-free base material. Will tolerate light millscale. SuperArc® L-50 also has an excellent reputation for feedability and trouble-free performance. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends.
SuperArc L-56 ER70S-6 DC+ Lincoln's premium copper coated MIG wire, SuperArc® L-56 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. SuperArc® L-56 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of SuperArc® L-56. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, 100% carbon dioxide, and three or four-part gas blends. |
 |
|
手機站
您當前位置是：商業機會 >> 機械及行業設備 >> 焊接、切割設備與材料 >> 供應SuperArc L-59美國林肯氣保焊絲
聯系信息
