Finisar’s FTLX8571D3BCV 1G/10G Dual-Rate SFP+ transceivers are designed for use in 1-Gigabit and 10-Gigabit Ethernet links over multimode fiber. They are compliant with SFF-8431, IEEE 802.3-2005 10GBASE-SR/SW and 1000BASE-SX. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472. The FTLX8571D3BCV is a “limiting module”, i.e., it employs a limiting receiver. Host board designers using an EDC PHY IC should follow the IC manufacturer’s recommended settings for interoperability with an SFP+ limiting module. his product is for applications specifically designed for 10G SFP+ ports and 1G/10GSFP+ ports and not native 1G SFP ports. The transceiver is RoHS compliant and lead free per Directive 2002/95/EC, and Finisar Application Note AN-2038.
Product Features
• Hot-pluggable SFP+ footprint
• Supports rate selectable 1.25 Gb/s or 9.95 to 10.3 Gb/s bit rates
• Power dissipation < 1W
• RoHS-6 compliant (lead-free)
• Commercial temperature range 0°C to 70°C
• Single 3.3Vpower supply
• Maximum link length of 300m on 2000 MHZ-km MMF
• Uncooled 850nm VCSEL laser
• Receiver limiting electrical interface
• Duplex LC connector
• Built-in digital diagnostic functions
Applications
• 1000BASE-SX 1G Ethernet
• 10GBASE-SR/SW 10G Ethernet |
 |
|
手機站
您當前位置是：商業機會 >> 電腦、數碼 >> 網絡設備、配件 >> 供應finisar SFP+萬兆多模FTLX8571D3光纖模塊
聯系信息