一、概述
GDS-50 型秒表檢定儀是一種多功能，綜合性的時間檢定自動測試裝置，它能對機械秒表、電子秒表進行進行檢定。本儀器采用高穩定度石英晶體振蕩器作為時間基準，用AVR 單片機和TTL 集成電路為主要元件，大屏LCD顯示，旋轉編碼開關操作，滿足JJG237-2010《秒表檢定規程》的要求，是一種較理想和實用的秒表檢定儀。
二、技術指標
1. 測量范圍
1ms------99999.9s
2. 測量誤差
秒表：± 3ms
3. 晶體振蕩器
準確度：±5×10-7/日
三、工作條件
環境溫度：0~40℃ 相對濕度：<80%
FEATURES
Comply with national regulation of calibrating.
Auto time measuring device of multi-function and high synthesis
with time base of crystal oscillator of high stability
With advanced FPGA technique and MCU integration control, quick response.
LED display with clarity interface, easy operation
suitable for metrological service, factory, academy and scientific research institution to calibrate all kinds of timer instruments
Dimension: 255mm×100mm×380mm
Weight: 4.9kg
SPECIFICATIONS
For mechanical stopwatch and electronic stopwatch calibrating
Input Range T0 1s-99999s Accuracy ＜±（1×10-7×T0＋3ms）
For pointer stopwatch calibrating
Input Range T0 Continuous: 0.1s-99999s
Trigger: 1s-99999s
Pause: 0.1s-99999s
Accuracy ＜±（Mains frequency accuracy×T0＋0.6ms）
For millisecond stopwatch and digital stopwatch calibrating
Input Range T0 1×102μs ~1×109μs Accuracy ＜±（1×10-7×T0＋3μs）
Crystal Oscillator
Nominal Frequency 10MHz Daily Aging Rate ≤5×10-9/day
Second Stability ≤1×10-10/s Accuracy ≤1×10-7
Warm Up Time 12 hour |
 |
|
手機站
您當前位置是：商業機會 >> 儀器儀表 >> 計量標準器具 >> 供應GDS-50型秒表檢定儀
聯系信息
