元佐電子系AUK、KODENSHI、Opto全系列產品(IC、MOS、LED、光電光耦傳感器、二三極管等)中國大陸區唯一的原廠代理商! R943HB7G R943V17G
3. Features
1)High ripple rejection
2)Wide operating supply voltage : 2.7V ~ 6.0V
3)Low current consumption : 3.0V(1.0㎃), 5.0V(1.2㎃)
4)Band pass filter center frequency : 37.9㎑
5)Epoxy IR filter characteristic : 940㎚
6)Maximum interference safety against optical and electrical disturbance
7)Internal filter for a high frequency lighting fluorescent lamp
8)Internal pull-up putput : 50㏀
4. Absolute Maximum Ratings
1)Supply voltage : 0 ~ 7.0V
2)Supply current : 0 ~ 3.0㎃
3)Output current : 0 ~ 2.5㎃
4)Operating temperature : -20℃ ~ +80℃
5)Storage temperature : -30℃ ~ +85℃
6)Reflow soldering temperature (Pb Free) : 260℃(Max 5 sec)
5. Cautions
1)Store and use where there is no force causing transformation or change in quality.
2)Store and use where there is no extreme humidity.
3)In order to prevent damage from static electricity, make sure that the human body and the soldering iron are connected to ground before using.
4)The ripple noise from power supply lines may shorten detecting distance of IR receiver module. Thus, in order to ensure more reliable operating please add RC filter(R=100Ω, C=47㎌) between Vcc and GND.
5)When a disturbance signal is applied to the series, it can still receive the data signal. However the sensitivity is reduced to the level that no unexpected pulses will occur. Some examples of such disturbance signals which can be suppressed pulses by the series.
ⓐDC light(Ex. From tungsten lamp or sunlight)
ⓑContinuous signal at center frequency or any other frequency
ⓒSignals from fluorescent lamps with electronic ballast with high or low mosulation.
詳細參數見網站規格書 |
 |
|
手機站
您當前位置是：商業機會 >> 電子元器件 >> 光電子器件 >> 供應R943HB7G
聯系信息