TM-102-F電池芯熱壓整形機特點：
1． 機架采用30*30*2.5mm不銹鋼焊接而成，面板采用不銹鋼板，其余部件均為鍍硬鉻處理，美觀大方；
2． 采用3T增壓缸作動，安全又環保，加熱板采用黃銅板，導熱性能好；
3． 控制系統可采用步進電機控制進出料，緊密滾珠絲桿傳動，直線導軌保證平衡度，加熱系統可采用PLC+溫度模塊控制，操作面板采用三菱五色觸摸屏，生產效率，自動化程度，安全性，精密度均高；
4． 生產相應型號電池只需放入相應厚度模塊即可批量生產，產品更換簡便。
出力 1.2-3T
發熱面板尺寸 400*300mm
*大開口高度 350mm
閉合高度 0
地面離工作面高度 1030*650*1960mm
體積 220vac
溫度范圍 40-120
溫度控制 正負三度
升溫時間 小于１５分
保壓時間 0-200sec
Features:
1. The rack uses the 30*30*2.5mm stainless steel welding to become, the kneading board uses the stainless steel plate, other parts are plate hard chromium prcessing, elegant appearance;
2. Uses 3T the turbo-charged cylinder to do moves, safe the environmental protection, the hot plate uses the yellow copper plate, the heat conduction perfor mance is good;
3. The control system may use step-by-steps the motor control to pass in and out the material, the close ball bearing lesd screw transmission, the straight line guide rail guarantee trim, the heating system may use the PLC+ temperature modular control, operates the kneading board to use the Mitsubishi five colors touchscreen, the production efficiency, the automaticity, the security, the accuracy is high;
4. Produces the corresponding model battery only to put in the corresponding thickness module volume production, the product replacement is then simple. |
 |
|
手機站
您當前位置是：商業機會 >> 機械及行業設備 >> 其他行業設備 >> 供應上海臺銘C型氣液增壓熱壓機TM-102C
聯系信息