Product name Water tank packing printing adhesive
State Paste
Packing 25KG/drum for white, 20KG/drum for clear
Storage 6 months in cool place
Application Suitable for waterproof fabric, mercerized cotton, nylon, TPU, PU etc.
Features 1. High elasticity
2. Extra fastness
3. SGS detecting passed, no PVC, no heavy metal, no NPEOs
Mix proportion Light: White printing paste 70-80% + Clear printing paste 20-30% + pigment ?%
Deep: White printing paste 20-30% + Clear printing paste 70-80% + pigment ?%
Printing process 1. Printing with clear printing paste for 1-2 times
2. Mixing with white printing paste, clear printing paste, pigment and stirring them evenly.
3. Printing again for 3-4 times (3-4 scrapes per time).
4. Drying it in room temperature, or baking for 1-3 minutes under 150-180℃
5. Finish.
Attentions 1. Please drying paste surface with cold air each time before re-printing.
2. The pigment is max 12%, otherwise it’ll be easily faded.
品名 棉服專用膠漿              
外觀 糊狀
包裝 白膠漿25KG/桶，透明漿20KG/桶
貯存期 常溫下6個月
應用 棉服、防水箱包布、涂層布、絲光棉、硅油布、尼龍布、也可用于TPU、PU等皮革等
賣點 1. 超強牢度耐水洗
2. 手感柔軟
3. 符合美國ASTM對鄰苯二甲酸脂和歐盟EN71 Part 3對重金屬含量的要求
調配比例 印淺色：白膠漿70-80% + 透明漿20-30% + 固化劑3% + 色種？%
印深色：白膠漿20-30% + 透明漿70-80% + 固化劑3% + 色種？%
工藝流程 1. 絲網選用100-120目，用絲印硬方刀75度刮印, 以透明漿打底1-2次
2. 將白膠漿，透明漿，色種，固化劑攪拌勻印2-3次
3. 24-48小時自然干燥，或150-180度焙烘1-3分鐘
注意事項 1.加入固化劑的漿必須在4~8小時內用完       |
 |
|
手機站
您當前位置是：商業機會 >> 紡織、皮革 >> 紡織輔料 >> 供應棉服專用膠漿
聯系信息