哈姆雷特高壓安全閥H900-HP系列詳細介紹
【規格參數】
1、H-900HP is available as CE/PED products
2、316St.St. Construction
3、Service up to 6000 psi
4、Set Pressure from 50 psig to 6000 psig ( 3.50 to 414 bar)
5、Identifying colored springs for each pressure range
6、Replaceable springs for a variable pressure range
7、Available in all pipe threads and LET-LOK®connectors
8、Sizes: 1/4" or 6mm
產品名稱:泄壓安全閥
型號規格:H900-HP系列
公稱直徑:1/4"和6mm
工作壓力:50~6000psi
閥體材質:不銹鋼
連接方式:螺紋、卡套
【產品其他類型】
哈姆雷特比例卸荷閥
【產品簡述】
哈姆雷特H900-HP系列泄壓安全閥該閥門為適用于高壓環境的泄壓安全閥,它在正常情況下處于關閉狀態(即"常閉")。當系統壓力達到預先設定的數值時,閥門才打開。當系統的壓力下降到低于設定值的水平時,閥門將重新關閉。材料為316型不銹鋼結構,*大允許工作壓力為6000psi,允許的工作壓力范圍為50~6000 psi;對于每個壓力設定范圍,相應的彈簧都噴涂成對應的顏色,以便區別。彈簧可以更換,以便適用于各種不同的壓力設定范圍。接口尺寸為1/4"和6mm,閥門可以配置所有類型的管螺紋和Let-Lok系列管接頭。
【產品優點】
1、H-900 HP is a series of relief valves for high-pressure service.
2、The valve is normally closed.
3、It will open when the system pressure reaches the set level.
4、It will re-close when the system pressure falls below the set level.
【產品承諾】
本司保證,所銷售的以色列哈姆雷特HAM-LET安全閥100%為原廠生產閥門,不經本公司采購的產品不能確保其真偽并不承擔售后服務工作。 |
 |
|