(一)我司 OTC中正國際檢測認證中心專業從事歐洲CE測試與認證,沙特SASO測試與認證,尼日利亞SONCAP測試與認證,其它第三世界清關文件如烏干達,坦桑尼亞,肯尼亞,阿爾及利亞等國家的測試與COC清關文件
(二)腳手架(scaffold) 指施工現場為工人操作并解決垂直和水平運輸而搭設的各種支架。腳手架制作材料通常有:竹、木、鋼管或合成材料等。
腳手架進入歐盟就必須做CE認證并加貼CE標志。在歐盟市場CE標志屬強制性認證標志,產品要想在歐盟市場上自由流通,就必須加貼CE標志,以表明產品符合歐盟指令的基本要求。
腳手架CE認證證書必須由總部位于歐盟成員國的認證機構才可以簽發證書。
(1)腳手架測試標準:
EN 1004:2004,
EN 74-1:2005,AS/NZS1576.2:2009,
GB 15831-2006
ANSI/SSFI SC100-5/05CAN/CSA-S269.2-M87:2003
(2)腳手架CE測試認證項目:
Wind resistance (風載)
Resistance to snow load (雪載)
Operating effort (操作力)
Design of the operating mechanism a HPV diagrams ("Human Pull Value") (操作設計檢查)
Resistance of locking mechanism (鎖緊裝置測試)
Mechanical endurance (repeated operating cycles) (機械壽命)
Operation in frosty conditions (低溫操作)
(3)歐洲標準:EN 74-1:2005
腳手架和支承架用扣件、中心螺栓和底座.第1部分:管用扣件.要求和試驗規程
測試項目:
1)直角扣件(需要指定等級Class A /Class B)
抗滑Slipping force
抗破壞Failure force
抗拉分Pull apart force
壓痕測試indentation
十字抗彎剛度及極限彎矩(僅適用B級) Cruciform bending stiffness and Cruciform bending ultimate moment(Class B only)
扭轉剛度及轉矩(僅適用B級) Rotational stiffness and moment(ClassB only)
2)旋轉扣件(需要指定等級Class A/Class B)
抗滑Slipping force
抗破壞failure force
壓痕測試 indentation
3)平行扣件(需要指定等級Class A/Class B)
抗滑Slipping force
抗破壞failure force
壓痕測試 indentation
4)對接扣件(需要指定等級Class A/Class B)
抗滑Slipping force
彎矩(僅適用B級) Bending moment(Class B only) |
 |
|