PTL標準測試角、PTL測試角、測試角的詳細介紹
T 06e
P T L T E M P E R A T U R E M E A S U R I N G B O A R D
t o me a s u r e t h e t emp e r a t u r e s i n t h e b a s e s o r i n t h e f i x i n g
s u r f a c e s f o r a p p l i a n c e s a n d l umi n a i r e s i n o p e r a t i o n
according to IEC 60335-1 / 2006-09 § 11.2 and § 11.3
S t a n d a r d O u t f i t :
1 plywood board, 20 -2 mm thick, with frame on all sides and with covering board at the lower
side, together approx. 150 mm thick, with 4 feet, size and layout to allow the completition to a
test corner,
1 set of measuring points, consisting of:
copper disks, diameter 15 mm, 1 mm
thick, embedded at distances of 50
mm x 50 mm in the plywood board,
their front flush with the surface of the
plywood board,
and fine-wire thermocouples nickelchromium-
nickel (NiCr-Ni), soldered to
the back of the copper disks, thermoelectric
wires with a diameter of 0,3 -0,1
mm, insulated with glass-silk or similar
temperature resistant material,
1 set of change-over switches to select the lines resp. rows of the copper disks, to connect the
selected copper disk with the socket-outlet and the temperature indicating instrument,
1 socket-outlet, two-pole, almost without thermoelectric voltage, plug with cable of nickelchromium-
nickel, length 1.5 m, for the connection of a external measuring instrument,
1 temperature indicating instrument, supplied by battery, and switch to select instrument or
socket-outlet.
Des ign: plywood board, frame and copper disks
painted dull black, copper disk lines and rows
marked.
Most PTL Temperature Measuring Boards are tailormade,
the following Article Nos are examples.
measuring area copper disks Article
in mm x mm: lines x rows = quantity: No.:
350 x 650 7 x 13 = 91 T 06.09
500 x 750 10 x 15 = 150 T 06.15
700 x 900 14 x 18 = 252 T 06.25
850 x 1150 17 x 23 = 391 T 06.39 |
 |
|
手機站
您當前位置是：商業機會 >> 儀器儀表 >> 儀器儀表配附件 >> 供應PTL標準測試角、PTL測試角
聯系信息