The 1x1 and 1x2 solid-state fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate CL 1x1,1x2 fiber optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time.
The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.
◇Features
l Low Insertion Loss
l Wide Wavelength Range
l Low Crosstalk
l High Stability, High Reliability
l Epoxy-free on Optical Path
l
Latching and Non-latching
◇ Application
lMetropolitan Area Network
lR&D in Laboratory
lSystem Monitoring
l
Configurable OADM
◇ Performance
Parameters
SOSW-1×2
Wavelength Range
nm
1295~1325,1520~1580
Testing Wavelength
nm
1310/1550
Insertion Loss
dB
Typ:0.7 ,Max:1.0
Return Loss
dB
≥50
Crosstalk
dB
≥45
PDL
dB
≤0.10
Polarization Mode Dispersion
ps
≤0.20
TDL
dB
≤0.25
Optical Power Handling
mw
300
Switch Speed (rise, fall)
us
50~200
Repetition Rate
Hz
2K
Operation Temperature
℃
-40～+85
Storage Temperature
℃
-40～+85
Dimension
mm
(L)58.2×(W)8.4×(H)8.4(±0.2)
◇ Ordering Information
A
B
C
D
E
F
G
Type
Mode
Wavelength
Switch
Fiber Diameter
|
 |
|
手機站
您當前位置是：商業機會 >> 通訊產品 >> 網絡通信產品 >> 供應1X1磁光開關
聯系信息