用途特點 USE AND CHARACTERISRICS
1、本機的所有滑動部位都由液壓系統供油潤滑，減少磨損，更加延長了機器的使用壽命。
2、當上壓板速下壓到裁斷作業時會自動慢切，使裁斷物上下層之間沒有尺寸誤差。
3、本機在設計時結構的變化，讓使用者不用擔心機器有漏油之虞。
4、由于電機、油泵外置，其通風冷卻條件好，運行安全，壽命長。
5、刀模設定快捷準確，簡單易學。
6、電機功率小，能耗低。
1.Oil is supplied to sliding parts of this machine by the hydraulic system for lubrication,reducing wear and prclonging the service life the machine.
2.The upper platen may autimaticakky cut slowly as it presses down rapidly to the knife mold for cutting so that there will be no dimension errors between the upper and lower layers of the cutting materials.
3.Structural changes during designing of this machine remove the need for the users to worry about possible oil leakage of the machine.
4.External motor and oil pump enable good ventilating and cooling conditions,safety operation and prolonged service life.
5.Setting of the knife mold is rapid,accurate and easy-to-leam.
6.Small motor power tesults in low power consumption.
技術參數 PARAMETER
型號
Model number
XCLP2-500A
XCLP2-600A
XCLP2-800A
XCLP2-1000A
*大裁斷力
Macimum cutting force
500KN
600KN
800KN
1000KN
上壓板至工作臺面距離
Distance between the upper platen and the working table surface
55-195mm
50-200mm
50-200mm
50-200mm
工作臺面積
Area of the working table 750×1600mm
750×1600mm
750×1600mm
750×1600mm
900×1600mm
電機功率
Motor power
3kw
4kw
5.5kw
5.5kw
液壓油量
Hydraulic oil quantity
200L
220L
320L
330L
機器重量
Machine weight
300kg
3500kg
3800kg |
 |
|
手機站
您當前位置是：商業機會 >> 紡織、皮革 >> 紡織、皮革加工 >> 供應精密四柱自動平衡液壓裁斷機
聯系信息