供應RHCM高光蒸汽模溫控制機 RHCM設備
RHCM高光蒸汽模溫控制機
RHCM high-gloss steam mold temperature controller
高光蒸汽模溫控制機簡介
Brief introduction to high-gloss steam mold temperature controller
高光蒸汽模溫控制機是采用高光蒸汽，當注塑機合模后吹入高光蒸汽，首先打模具溫度提高到一個設定值，然后開始給模腔注射塑膠，在注塑機完成保壓轉入冷卻后，開始注入冷卻水，模具溫度很快下降到一個設定值后開模，再向模具吹入空氣把冷卻水完全吹走，完成整個注塑過程。奧德*新開發的高光蒸汽模溫控制機，整機備有高光蒸汽模溫控制機和冷水增壓系統，并增加了熱水和冷卻水回收系統，節能效果顯著，利潤也相當可觀，這是奧德高光過熱水模溫控制機的優勢所在。
The high-gloss steam mold temperature controller employs high-gloss steam. When high-gloss steam is blown into the clamped injection molding machine, it is necessary to increase the mold’s temperature to a set value before conducting plastic injection into the mold cavity. After the injection molding machine finishes the pressure maintaining and starts the cooling procedure, cooling water will be injected then. Mold opening will start after the mold’s temperature drops quickly to a set value, and air will be blown into the mold to remove the cooling water thoroughly, thus finishing the entire injection. The Company’s newly developed high-gloss mold temperature controller has a high-gloss steam mold temperature controller and a cold-water pressurizing system and the extra designed hot/cooling water recovery system, promising outstanding energy-saving effect and great profit. It is the advantage of Aode superheated water high-gloss mold temperature controller. |
 |
|
手機站
您當前位置是：商業機會 >> 橡膠塑料 >> 塑料機械 >> 供應RHCM高光蒸汽模溫控制機 RHCM設備
聯系信息
