說明:Thermanit 25/14 EW 309L-17是鈦鈣型藥皮的超低碳Cr23Ni13不銹鋼焊條，可交直流兩用，由于含碳量低，故在不含Nb、Ti等穩定劑時也能抵抗因碳化物析出而產生的晶間腐蝕。
Well suited for fabricating austenitic/ferritic joints at max.
application temperature 300 °C (572 °F). Stainless, wet corrosion
up to 350 °C (662 °F). Suitable for depositing intermediate
layers when welding clad products. For joining unalloyed/
low alloy steels/cast steel grades or stainless/heat resistant
Cr steels/cast steel grades to austenitic steels/cast steel grades.
For depositing intermediate layers when welding the clad side
of plates of low carbon, unstabilized or stabilized CrNi(Mo,N)
austenitic metals.
用途: 用于合成纖維、石油化工等設備制造的相同類型的不銹鋼結構、復合鋼和異種鋼等構件，也可用于核反應堆、壓力容器內壁過渡層堆焊和塔內構件焊接。
TüV certified parent metals
X10CrNiMoNb18-12 (1.4583) combined with ferritic steels up to
fine grained structural steel S355N. Weld cladding (1st Layer)
on ferritic steels up to S355N and 20MnMoNi45;
Joints: of and between high-tensile, unalloyed and alloyed quenched
and temered steels, stainless, ferritic Cr and austenitic
CrNi steels, high manganese steels.
Weld claddings: for first layer of chemical resistant claddings on
ferritic-pearlitic steels up to fine grained steel S500N used in
steam boiler and pressure boiler construction, moreover for
creep resistant fine grained structural steels 22NiMoCr4-7 acc.
to leaflet “SEW-Werkstoffblatt” No. 365, 366, 20MnMoNi5-5 and
G18NiMoCr3-7. |
 |
|
手機站
您當前位置是：商業機會 >> 機械及行業設備 >> 焊接、切割設備與材料 >> 供應德國蒂森Thermanit 25/14不銹鋼焊條
聯系信息