余熱回收器開機前先檢查控制器開關應該處于斷開狀態,余熱回收器主冷電位器應旋至零位。開機時,先閉合爐排電機的接觸器,然后閉合控制器上的控制開關,再緩慢旋轉主令電位器至你所需要的轉速。The controller switch should be disconnected from the start up of the waste heat recovery unit, and the main cooling potentiometer of the waste heat recovery unit should be rotated to zero. When the phone is switched on, first closed grate motor contactor and control to close the control switch, then slowly rotating main potentiometer to what you need speed. |