產品詳情
Fabreeka基礎減震器Infab
Fabreeka Infab減震塊 是由壓模彈性塊制成。其本身經過研制成具高承載低頻減震能力。Infab 減震塊可應用在重機具，建筑物，測量機與 的軋鋼機大混凝土基礎塊下。
Fabreeka Infab "T" 型號減震塊有兩種不同類型以提 供給不同混凝土模板承載力的選擇。
在放置鋼筋前可將預先固定Infab減震塊的模板安置在坑底以加快施工速度。
主要特性/優點
Infab isolators may be supplied as individual units (blocks) or as isolation panels to facilitate ease of installation.
Infab isolation panels can be designed to have natural frequencies from 7.0 Hz to 10.0 Hz (6% damping) by custom designing the physical size and thickness of the isolators.
Type 1T and 2T isolators support loads from 800 lbs (3,600 kg) to 2,500 lbs (1,125 kg) each and have natural frequencies of 6.0 Hz to 9.0 Hz, with damping in the range of 2% to 6%.
The InfabTM "T" series isolator's unique design utilizes a steel coil spring inside oil/ozone resistant neoprene. The spring portion of the isolator provides a low natural frequency, while the elastomeric/neoprene portion provides damping.
The prefabricated InfabTM isolation panels are supplied to the job site marked per the supplied layout drawings, so that preparation on site is kept to a minimum. The panels with isolators attached are designed by Fabreeka® engineers who calculate the required support span distance between isolators based on the total supported load |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。