樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860
樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860
樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860 樂泰膠3860
技術服務熱線：021-51693135 / 021-22818476
樂泰 3860
樂泰膠3860膠水是一種中等粘度多功能的環(huán)氧澆注膠水，高導熱性和低熱膨脹性，固化后可耐水、耐油、耐酸和耐堿等。
PRODUCT DESCRIPTION
樂泰®
3860™ provides the following product
characteristics:
Technology Epoxy
Chemical Type Epoxy
Appearance (Resin) Black liquidLMS
Appearance (Hardener) Clear to amber liquidLMS
Appearance (Mixed) Grey
Components Two component - requires mixing
Viscosity Medium
Mix Ratio, by weight -
Resin : Hardener
100 : 9.5
Cure Room temperature cure
Secondary Cure Heat
Application Potting, Encapsulating or Casting
Other Application Areas Thermal conduction
Key Substrates Electronic components
樂泰®
3860™ is a medium viscosity versatile epoxy
casting system that exhibits high thermal conductivity and low
thermal expansion. Fully cured 樂泰®
3860™ is highly
resistant to weathers, water, gases and vapors, petroleum
lubricants and fuels and many mild acids and alkalis.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 2.2
Viscosity, Brookfield - resin, 25 °C, mPa·s (cP):
Spindle 7, speed 5 rpm 40,000 to 70,000LMS
Spindle 7, speed 50 rpm 19,000 to 39,000LMS
Viscosity, Brookfield, 25 °C, mPa·s (cP):
After mixing, extrusion 20,000
Pot life (once mixed or thawed), hours 1 to 2
Gel Time @ 25 °C, hours 24
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Recommended Curing Conditions
24 to 48 hours @ 22 °C
1 to 2 hours @ 65 ° |
免責聲明：以上所展示的信息由會員自行提供，內(nèi)容的真實性、準確性和合法性由發(fā)布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。