GYFTY 光纜的結構是將單模或多模光纖套入由高模量的聚酯材料做成的松套管中，套管內填充防
水化合物。纜芯的中心是一根非金屬加強芯 (FRP) ，對于某些芯數的光纜來說，非金屬加強芯外還
需擠上一層聚乙烯 (PE) 。松套管 ( 和填充繩 ) 圍繞中心加強芯絞合成緊湊的圓形纜芯，纜芯內的縫隙
充以阻水填充物，纜芯外擠制聚乙烯護套成纜。
GYFTY cable structure is the single mode or multimode fiber into the high modulus of the polyester material made of
loose tube, casing filled with anti
Water compound. The core of the cable core is a non metal reinforced core (FRP), for some of the core number of
optical fiber cable, the non metal to strengthen the core to be extruded on a layer of polyethylene (PE). Loose tube
(and filled rope) around the center to strengthen the core of the core to strengthen the synthesis of compact round
cable core, the gap filling in the cable core to prevent water filling material, the cable core extrusion of polyethylene
sheath into cable.
精確控制的光纖余長保證了光纜具有良好的抗拉性能和溫度特性松套管材料本身具有良好的耐水解
性能和較高的強度，管內充以特種油膏 , 對光纖提供了關鍵性保護聚乙烯 （PE ) 護套具有很好的抗紫
外輻射性能良好的抗側壓性和柔軟性采用下列措施來確保光纜的防水性能：
單根非金屬中心加強芯。
松套管內填充特種防水化合物。
完全纜芯填充。
Precise control of fiber excess length to ensure the cable has good tensile performance and the temperature char-
acteristics of the loose sleeve material itself has good resistance to hydrolysis performance and high strength, tube
filled with special cream, the fiber provides key protective polyethylene (PE) sheathed with softness and good anti
UV radiation performance good resistance to pressure the following measures are taken to ensure the cable water-
proof performance: Non
single metal center strengthening core.
Special waterproof compound filled with loose tube.
Full cable core filling.
光纜型號
( 以2芯遞增）
光纖數
纜芯
單元數
松套管內
*大光纖
數
光纜直徑
光 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。