產品概述︱Product Overview
大型常壓低溫液體貯槽是目前最經濟的液體貯存方法，具有儲存量大、壓力低、安全可靠等特點，廣泛應用于工業氣體液氧、液氮、液化天然氣(LNG)的儲存，降低了貯存成本，貯槽結構簡單，施工容易，貯槽采用平底拱蓋、圓柱雙層壁粉末絕熱結構，主要由內膽、外槽、絕熱結構、管路系統及安全裝置等組成。
Large atmospheric cryogenic liquid storage tank is the most economical liquid storage method at present. It has the characteristics of large storage capacity, low pressure, high safety and reliability. It is widely used for storage of indu-strial gas as liquid oxygen, liquid nitrogen and LNG. By advantage of lower cost, lower structure, easier cons-truction.Tank adopt flat bottom, cylinder and double-wall powder insulation structure, mainly consist of inner layer, outer shell, insulation structure, pipeline system and safety device, etc.
主體結構形式︱Main Structure
配置參數：400~50000m³
Capacity: 400~50000m³
工作壓力：10KPa~50KPa
Pressure: 10KPa~50KPa
貯存介質：液氧、液氮、液氬、乙烯、乙烷 、液化天然氣（LNG )
Storage Medium: LOX, LIN, LAr, Ethylene, Liquid ethane, LNG.
絕熱方式：雙層壁粉末堆積絕熱+微正壓干燥氮氣
Insulation Mode: Double layer perlite insulation + Pressurized nitrogen
流程系統：
1. 進液系統；2. 溫度系統；3. 排液系統；4. 氣體排放系統；5. 泵后回流系統；6. 分析取樣系統；7. 夾層氮氣供應系統；
8. 安全系統；9. 液位、壓力測量系統；10. 增壓系統
Process System:
1. Liquid inlet system; 2. Temperature system; 3. Liquid outlet system; 4. Vent system; 5. Gas return system; 6. Sampling system; 7. Interlayer nitrogen filling system; 8. Safety system; 9. Level & pressure measurement system; 10. Pressurizing system |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。