樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/樂泰 352電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
樂泰®
352™ is suitable for bonding a wide range of
materials. When cured, it is highly resistant to vibration and
impact forces. 樂泰®
352™ is used to bond, seal or coat
metal and glass components in industrial applications. Typical
uses include unitizing electrical devices, appliance parts and
decorative components.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.06
Refractive Index, ASTM D542 1.48
Flash Point - See MSDS
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 6, speed 20 rpm 15,000 to 26,000LMS
TYPICAL CURING PERFORMANCE
This product is cured when exposed to UV radiation of 365nm.
To obtain a full cure on surfaces exposed to air, radiation at
250nm is also required. The speed of cure will depend on the
UV intensity as measured at the product surface Storage
Store product in the unopened container in a dry location.
Storage information may be indicated on the product container
labeling.
Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or
greater than 28 °C can adversely affect product properties
樂泰®
352™適用于粘接廣泛的
材料固化時，耐振動性高
沖擊力樂泰®
352™用于粘合，密封或涂層
金屬和玻璃組件在工業應用中。典型
用途包括整合電氣設備，家電部件和
裝飾組件。
固化材料的典型特性
比重@ 25°C 1.06
折射率，ASTM D542 1.48
閃點 - 參見MSDS
粘度，Brookfield - RVT，25°C，mPa•s（cP）：
主軸6，轉速20rpm 15,000至26,000LMS
典型的固化性能
該產品在暴露于365nm的紫外線輻射下固化。
在暴露于空氣的表面上獲得完全固化，輻射
也需要2 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。