HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝/HYSOL ES2205電子組裝工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
HYSOL®ES2205™ is a filled epoxy system with a high operating temperature and long pot life.
It is recommended foruse where excellent chemical resistance, high heat distortion temperature and good electrical properties under high humidity conditions are required. This product is recommended for servo stators, high temperature resistors, transformers, and high temperature cast shapes.
TYPICAL PROPERTIES OF UNCURED MATERIAL Part A Properties Color Black Filler Content, % 47 to 51Density, @ 25 °C, g/cm3 1.5 to 1.65Viscosity, Brookfield - RVF, 25 °C, cP:Spindle 6, speed 4 rpm 60,000 to 100,000Part B Properties Color Dark Red Filler Content, % 0 Density, @ 25 °C, g/cm3 1.0 to 1.05Viscosity, Brookfield - RVF, 25 °C, cP:Spindle 2, speed 20 rpm 450 to 650
Mixed Properties Pot Life @ 25 °C, hours:200 g mass 7 to 8Gel Time @ 40 °C, hours:200 g mass 4 to 5Gel Time @ 100 °C, hours:200 g mass 40 to 50Gel Time @ 121 °C, minutes:10 g mass 20 to 25Viscosity @ 25 °C, cP:Spindle , speed r/min 20,000 to 30,000StorageStore product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.Liquid Storage - Liquids should be stored at 23°C or below, in closed containers.
If stored below 23°C, the material MUST be allowed to come to room temperature, in the sealed container, to avoid moisture contamination.
HYSOL®ES2205™是一種充氣環氧系統，具有極好的溫度和較長的使用期限。
建議使用在高濕度條件下優異的耐化學性，高熱變形溫度和良好的電氣性能。
本產品推薦用于伺服定子，高溫電阻，變壓器和高 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。